answersLogoWhite

0

I'm guessing you are referring to the screw-in base size. If you have an adapter and the wattage does not exceed manufacturer's recommendations there should be no problem.

User Avatar

Wiki User

13y ago

What else can I help you with?

Continue Learning about Natural Sciences

What is the direncence between a light bulb and a tungsten light bulb?

Common old-fashioned light bulbs are of the incandescent type (including halogen) with a tungsten filament glowing at about 3000 degrees C emitting black-body radiation (light and heat). Tungsten is used because it has the highest melting-point of all metals. The other type of bulb is fluorescent, of various types like tubes and CFLs


How hot does a 50 watt light bulb get?

This depends on the bulb design. A simple tungsten filament bulb might have a surface temperature of the bulb well above 100 C. A fluorescent lamp will be much cooler for the same light output.


Would you expect to find direct or alternating current in the filament of a light bulb in your home the filament of a light bulb in a car the output of a battery charger?

Light bulb in the home - alternating current (A/C) Light bulb in a car - direct current (D/C) Output of a battery charger - direct current Input of a battery charger - usually alternating current


Is the total bulb wattage for all three bulbs or each bulb when the sign says use type c lamp 60 watts bulb max?

The total bulb wattage refers to the maximum wattage for each bulb, not the combined wattage for all three bulbs. Therefore, when the sign specifies a maximum of 60 watts for each bulb, you should not exceed 60 watts for any single bulb used in the fixture.


Can you use a regular bulb in a freezer?

A light bulb is already mostly frozen. The glass parts are in a state called a "glassy solid". The metal filament, filament supports and base are in a state we call a "solid". The only part of a light bulb which is not already frozen is the dilute gas inside it, which is normally a mixture of nitrogen and argon. Argon freezes at -200 C and nitrogen freezes at -210 C. So if you cool a light bulb down to -210 C (-346 F) then it will become completely frozen. Of course, it will still work.

Related Questions

How do you replace stop light bulb on c max focus?

you can not do it


What is a C.Q. light bulb?

what is a C. O. light bulb?


What is a f type light bulb?

A b type light bulb is better known a candelabra type, although they can also have a medium e-26 base. B-type light bulbs come in a flame tip and torpedo style.


What is the direncence between a light bulb and a tungsten light bulb?

Common old-fashioned light bulbs are of the incandescent type (including halogen) with a tungsten filament glowing at about 3000 degrees C emitting black-body radiation (light and heat). Tungsten is used because it has the highest melting-point of all metals. The other type of bulb is fluorescent, of various types like tubes and CFLs


How do you change the bulb on the boot light in Mercedes c series?

To change the boot light bulb in a Mercedes C-Class, first, open the boot and locate the light housing. Carefully pry off the cover using a flat tool or your fingers to avoid damaging it. Remove the old bulb by twisting it counterclockwise, then insert the new bulb and twist it clockwise to secure it. Finally, replace the cover and ensure the light functions properly before closing the boot.


Can vitamin c light up a bulb?

No.


How do you replace the brake light bulb on a 1995 Saab 9000?

Depending on the model, B C or D there are some differences. The C model has lights on the rear pillars - access is by removing the two screws - see weblink for details. If it is a model with conventional lights ie below the window, access is via a panel inside the boot area. Remove the panel, remove the connector and replace bulb with the correct type. The bulb has small lugs like an household bulb, it will remove and replace with a twist action. Some bulbs are combined stop tail lights, so check at the accessory shop.


How do you replace front right marker light on Mercedes c 300?

To replace the front right marker light on a Mercedes C300, first, open the hood and locate the headlight assembly. Remove the cover or housing protecting the marker light by unscrewing any clips or screws. Gently twist the marker light bulb socket counterclockwise to remove it, then replace the old bulb with a new one, ensuring it is securely in place. Finally, reassemble the housing and test the new marker light.


How do you change the side light bulb c class?

To change the side light bulb on a Mercedes-Benz C-Class, first, open the hood and locate the headlight assembly. Depending on the model year, you may need to remove the plastic cover or access panel to reach the bulb holder. Twist the bulb holder counterclockwise to remove it, then pull out the old bulb and replace it with a new one, ensuring not to touch the glass part. Finally, reassemble the parts and test the new bulb to ensure it's working properly.


What do filaments do inside a light bulb?

It passes an electric current and its temperature rises to about 3000 degrees C so that it is white-hot and gives off light. Unfortunately this type of bulb also produces a lot of heat, which is just wasted power.


Can you melt light bulb glass?

Yes ,but you have to melt it at 3000'C


Can you use a type A bulb in a lamp that calls for a type C bulb?

I don't think it will fit. Do they both have a medium base size?