0
What else can I help you with?
How many volts does 12-2 wire carry?
12-2 wire typically carries 120 volts in residential settings and 240 volts in certain appliances or systems that require higher voltage.
Can you use 240 volts with a 120 volt supply?
No, it is not possible to use 240 volts with a 120 volt supply directly. You would need a transformer to step up the voltage from 120 volts to 240 volts. Attempting to use 240 volts with a 120 volt supply without a transformer can damage equipment and pose a safety hazard.
How you can produce 240 volts from a single phase 3 wire system with a nominal voltage of 120 volts?
you can use two hot wire different phases with a double pole braker .
What wire 240 volts 6500 watts 100 ft?
The sizing of wire is calculated by the amount of current the circuit draws. To find the amperage when the wattage is known use the following formula, Amps = Watts/Volts. 6500/240 = 27 amps. A #10 AWG copper conductor will limit the voltage drop to 3% or less, when supplying 27 amps at 240 volts for a 100 foot distance.
What is the ampere rating of a 8 gauge wire at 240 volts?
The ampacity of an 8 gauge wire at 240 volts would depend on the specific type of wire and the installation conditions. Generally, an 8 gauge wire can safely carry around 40-50 amps of current. It is important to consult the National Electrical Code (NEC) and local regulations for precise guidance.
What gauge wire for aluminum 240 volts 20 amp 200ft?
A #6 aluminum conductor will limit the voltage drop to 3% or less when supplying 20 amps for 200 feet on a 240 volt system.
How many volts does 12-2 wire carry?
12-2 wire typically carries 120 volts in residential settings and 240 volts in certain appliances or systems that require higher voltage.
What is ampere rating of 10 gauge wire at 120 volts and at 240 volts?
30 amps.
Does 240 volt have a neutral wire?
Yes <<>> In North America, a three wire 120/240 volt system uses a neutral wire. For 240 volts two "hot" wires are used with no neutral.
How much current at 240 volts passes through a wire with a resistance of 100 ohms?
current = voltage/resistanceAssuming the 240 volts is across the 100 ohm wire, 2.4 amperespower = current * voltageResulting in the wire dissipating 576 watts... One hot wire!
What size copper wire should you use for 240 volts 200 amps?
3/0 wire 3/0 wire
What gauge wire would I need for 2500 feet for 240 volts and 0.4 amps?
A #14 wire will do the job.
Can you use 240 volts with a 120 volt supply?
No, it is not possible to use 240 volts with a 120 volt supply directly. You would need a transformer to step up the voltage from 120 volts to 240 volts. Attempting to use 240 volts with a 120 volt supply without a transformer can damage equipment and pose a safety hazard.
Will 2.5mm wire conduct 240 volts?
You size wire by the current. Various insulations are rated for voltage, temperature and the medium where the wire will be run.
If an electric heater has a red blue and green wire that has been cut off how do i know if its 120 volts or 240 volts?
A label.
How do you wire a wire to a wire?
If you are connecting 120 volts, you connect the black wire to the breaker, white wire to the neutral bar, and ground wire to the ground bar. If you are connecting 240 volts connect the black & white wires to the breaker, & ground wire to the ground bar.
Can a 10-2 wire be connected to a 10-3 recepticle for a dryer?
No, the dryer needs 120 volts supplied by the neutral third wire, along with the 240 volts for the dryer element. One of the two 240 volt supply conductors is used with the neutral to supply 120 volts to the controls and the drum motor. That is why a three wire cable is needed.
