One watt is 0.001 kilowatt. 65 watts is 0.065 kilowatts. It does not matter what the voltage is - watts are watts.
To convert amps to watts, you need to know the voltage of the circuit. The formula to calculate watts is: Watts = Amps x Volts. Multiply the current in amps by the voltage in volts to get the power in watts.
The device consumes 84 watts of power. This can be calculated by multiplying the voltage (12 volts) by the current (7 amps). So, 12 volts x 7 amps = 84 watts.
Volts * Amps = Watts 12 Volt * 2 amp = 24 Watts
To find the amp draw, use the formula: Amps = Watts / Volts. In this case, 590 watts divided by 120 volts equals approximately 4.92 amps. Therefore, the unit draws around 4.92 amps when operating at its maximum power of 590 watts.
To find the current in amps that a 750 watt, 120 volt heater draws, you can use the formula: Amps = Watts / Volts. So, 750 watts divided by 120 volts equals 6.25 amps. Therefore, the heater draws approximately 6.25 amps.
The number of watts measures the power, and Ohm's laws requires us to know the current as well as the voltage to determine the power.P = i x eFor example, if the fridge draws 10 amps at 115 volts, the power is 1150 watts.AnswerThe answer is that it depends on the fridge. Look at the nameplate information for your particular fridge; that's where you will find your answer.
To convert amps to watts, you need to know the voltage of the circuit. The formula to calculate watts is: Watts = Amps x Volts. Multiply the current in amps by the voltage in volts to get the power in watts.
Yes, as long as the bar fridge wattage is less than 650 W
The device consumes 84 watts of power. This can be calculated by multiplying the voltage (12 volts) by the current (7 amps). So, 12 volts x 7 amps = 84 watts.
Volts * Amps = Watts 12 Volt * 2 amp = 24 Watts
Find the block heater and look for the nameplate on it. It will be in watts. Use the following equation to find the amperage that it draws. Amps = Watts/Volts. The voltage to use for the truck will be 12 volts.
Power = Volts * current [p = E*I]; 120volts*10amps = 1200watts
4800 watts because watts = volts x amps.
No. Watts = Volts x Amps Watts does not directly convert to volts.
To find the amp draw, use the formula: Amps = Watts / Volts. In this case, 590 watts divided by 120 volts equals approximately 4.92 amps. Therefore, the unit draws around 4.92 amps when operating at its maximum power of 590 watts.
Depending on size of Fridge. But AVERAGE is 12 volts for fridge, circuit necessity 15 amps 15 amps X 120 Volts=1800 watts minimum...I'm LEARNING myself
All of the information is on the nameplate that is located, probably on the back of the fridge. Pull the unit away from the wall and look for the voltage and amperage that is stamped on the plate. Using the equation Watts = Amps x Volts, the wattage of the fridge can be found.