The equation that you are looking for is W = I x E. Watts = Amps x Volts.. As you can see if no voltage is given the question can not be answered. Once you supply the voltage and multiply it by the maximum amperage you stated, the results will be maximum wattage. Divide this figure by 8.5 and you will find the maximum number of lamps that you can add to this circuit.
ummm...4(?) is this a trick question?
The recommended type of 60 watt bulbs for use with a candelabra are candelabra bulbs.
One can buy 1000 watt HPS bulbs through the better known webshops like Amazon or eBay. 1000 watt HPS bulbs are most often just to grow specific plants at home.
A 15 amp circuit can handle approximately 8-10 60 watt bulbs. Each 60 watt bulb draws 0.5 amps of current, so you divide the circuit's amp rating (15 amps) by the current draw per bulb (0.5 amps) to get the approximate number of bulbs it can handle.
To determine how many 12-volt, 50-watt bulbs can be used on a 100 VA transformer, first convert the transformer's capacity from VA to watts, which is effectively the same for resistive loads (100 watts in this case). Each 50-watt bulb requires 50 watts, so you can divide the total available watts by the wattage of one bulb: 100 watts ÷ 50 watts/bulb = 2 bulbs. Therefore, you can use 2 of the 12-volt, 50-watt bulbs on a 100 VA transformer.
None.
ummm...4(?) is this a trick question?
we can use 12 no's
The recommended type of 60 watt bulbs for use with a candelabra are candelabra bulbs.
3 bulb can be connected..............................
17
2000
4
This question does is not answerable. A watt is a volt times an amp. With out knowing how many amps the bulbs use there is no answer.
Yes.
To do any replacements of different bulbs you have to consider what the new current will be and if the wire size and fuse will be able to take the new current (amps). Use this formula, W = A x V or A = W/V.
None at all.