It depends on the voltage; which depends on the country. If you know the voltage, divide the wattage by the voltage, the result is the amperage.
Power(Watts) = I (Amps) x E(Voltage) PIE rule. so 1000 = I x 240. 1000/240 = 4.16667 amps.
Depends on the size of the LED light and the voltage applied. An example is an LED 24 volt globe light that pulls 8 watts which draw 0.333333 amps. Take an LED 120 volt light bulb draws 12 watts and will pull 0.1 amps. The same bulb at 240 volts wil draw 0.05 amps. it really depends on the watts and voltage applied. An average would be about 0.1 amps.
To find the resistance in ohms of a 194 12-volt bulb, you can use Ohm's Law (R = V/I). The 194 bulb typically has a current rating of about 0.25 amps. Using this information, the resistance would be approximately 48 ohms (R = 12V / 0.25A).
Without knowing the voltage, I can not tell you how many amps a 60 watt light uses. If you have a 12 volt system in a car, then a 60 watt light will pull 5 amps. If you have a 120 volt system in a house, then a 60 watt light will pull 1/2 amp. If you have a 240 volt system in an industrial building, then a 60 watt light will pull 1/4 amp.
On a 50 amp 3 phase connector, you can pull 50 amps per leg. This means that each of the three phases can carry up to 50 amps individually, resulting in a total capacity of 50 amps per leg.
A 120 volt table lamp with a 75 watt bulb will pull 0.625 amps. With a 100 watt bulb it will pull 0.833 amps. And with a modern fluorescent 13 watt bulb it will pull 0.108 amps.
At 120 volts it will pull 4.166 amps. At 240 volts it will pull 2.08 amps.
Power(Watts) = I (Amps) x E(Voltage) PIE rule. so 1000 = I x 240. 1000/240 = 4.16667 amps.
A 60 watt bulb at 12 volts will pull 5 amps of current.
Aprox 12 amps.
Depends on the size of the LED light and the voltage applied. An example is an LED 24 volt globe light that pulls 8 watts which draw 0.333333 amps. Take an LED 120 volt light bulb draws 12 watts and will pull 0.1 amps. The same bulb at 240 volts wil draw 0.05 amps. it really depends on the watts and voltage applied. An average would be about 0.1 amps.
About 2.25 Amps.
at 230v it will use 5 to 6 amps
To find the resistance in ohms of a 194 12-volt bulb, you can use Ohm's Law (R = V/I). The 194 bulb typically has a current rating of about 0.25 amps. Using this information, the resistance would be approximately 48 ohms (R = 12V / 0.25A).
10.92 Amp
Without knowing the voltage, I can not tell you how many amps a 60 watt light uses. If you have a 12 volt system in a car, then a 60 watt light will pull 5 amps. If you have a 120 volt system in a house, then a 60 watt light will pull 1/2 amp. If you have a 240 volt system in an industrial building, then a 60 watt light will pull 1/4 amp.
On a 50 amp 3 phase connector, you can pull 50 amps per leg. This means that each of the three phases can carry up to 50 amps individually, resulting in a total capacity of 50 amps per leg.