Need to know the wire size.
# 8 RW90
A #3 copper wire with an insulation factor 90 degree C is rated at 105 amps.
CEC - #2 copper, RW90 insulation, 120 amps. #2 aluminium, RW90 insulation, 95 amps. he is not talking about Amplifiers. he is talking about amperes, the unit of measure that indicates how much electricity can flow through a wire. and it depends on the length of the wire, but 2 gauge wire will handle about 208 amps. depends on how big the amps are
A #16 copper conductor is not a wiring size that is used in homes. This is because the smallest breaker for residential use is rated for 15 amps. A #16 copper conductor is only rated at 13 amps. For a load of 13 amps over 100 feet a #12 copper would be required.
The ampacity of an electrical cable depends on several factors, including the cable's cross-sectional area (in mm²), insulation type, installation conditions, and ambient temperature. As a general rule of thumb, copper cables can carry approximately 10 amps per mm² for low-voltage applications. For example, a 1.5 mm² copper cable typically carries around 10-16 amps, while a 2.5 mm² cable can carry approximately 16-25 amps. Always consult local electrical codes and standards for specific applications.
A # 14 copper conductor will be fine to carry 8 amps at 120 volts. This size conductor is rated at 15 amps.
AWG # 6 copper
#8 RW 90 degree wire
# 8 RW90
If you mean 2/0 copper wire it is rated 175 amps. # 2 wire is 115 amps. If you are referring to 2.0 metric it is rated 15 amps.
Couple of things wrong here. 30 isn't a wire size. If you mean a wire that can carry 30 amps that would be # 10. Now it depends on how many # 10 wires you want to put into a conduit that governs the size of the conduit.
A #3 copper wire with an insulation factor 90 degree C is rated at 105 amps.
A #6 copper conductor with an insulation factor of 75 or 90 degrees C both have an amp rating of 65 amps. If the #6 conductor is connected to a breaker having a 90 degree C rating then the conductor can carry an amperage of 75 amps
CEC - #2 copper, RW90 insulation, 120 amps. #2 aluminium, RW90 insulation, 95 amps. he is not talking about Amplifiers. he is talking about amperes, the unit of measure that indicates how much electricity can flow through a wire. and it depends on the length of the wire, but 2 gauge wire will handle about 208 amps. depends on how big the amps are
10 amps
12 amps of electricity.
A #16 copper conductor is not a wiring size that is used in homes. This is because the smallest breaker for residential use is rated for 15 amps. A #16 copper conductor is only rated at 13 amps. For a load of 13 amps over 100 feet a #12 copper would be required.