Exactly 33,13035046 grams of copper.
The cost of 1 gram of isotopic copper can vary based on the isotopic composition and market conditions. Generally, isotopic copper can be much more expensive than regular copper due to the specialized production processes involved in isolating specific isotopes. Prices can range from hundreds to thousands of dollars per gram.
Copper(II) sulfate contain 398,1339 g copper in 1 kg CuSO4.
The rise in temperature when zinc is added to copper sulfate is not significantly higher than that when iron is added because both metals are less reactive than copper, and their reactions with copper sulfate involve similar exothermic processes. Zinc and iron displace copper from the solution, but the heat produced is limited by the energy required to break the bonds in the copper sulfate. Additionally, the differences in their reactivity do not lead to a substantial variation in temperature change for these particular reactions. Thus, both reactions yield comparable thermal energy.
35 grams of copper will cost $200. Since 14 grams cost $80, we can calculate the cost per gram by dividing $80 by 14 to get the cost per gram. Then, we can multiply the cost per gram by 35 to find the total cost for 35 grams.
a copper penny(one minted before 1980) weights very close to 3 grams. model rocketteers used to cut plastic grocery bag to a certain size and strap a copper penny to it and time how long it took to fall to the earth. it was very accurate method of measureing height. the point is, the old copper penny(not the new zinc core with a copper plating) were accurate. im sure you could find info on exactly how much a copper penny weighs....
Approximately 63.5g of copper can be obtained from 100g of copper sulfate through a chemical reaction known as displacement. This reaction involves immersing a piece of metal (such as iron) in a copper sulfate solution, causing the copper ions in the solution to be replaced by the metal ions.
A lot. Isotopic copper ranges from 1,300 to over 3,000 euro per gram.
$6.10
885x140=123900grams of copper sulphate per hour. If you are talking about using 885 gm of copper sulphate per ton of ore in the solution then the density of the copper sulphate(penta hydrate now because it's in water) is 2.284 gm per cm3 so that's 2.284x5=11.42gm per liter of solution, so 123900/11.42=10849.387 liters of copper sulphate(pentahydrate) per hour, NOTE:this is only how much copper sulphate is being used total in the solution which is 30% of the total liters used of solution because 25% of the water is inside the copper sulphate, the other 70% is just water. If you want the liters per hour of solution total, it is 34964.62 litres per hour of your 5% solution. I hope this was what you were looking for, I saw noone had answered and decided to try and get you what you needed.
A copper sulphate solution can have different concentrations depending on how much copper sulphate crystals have been added into the water. A typical 1 molar solution of copper sulphate would need 250g of CuSO4, mixed with 700ml of H2O, with 10ml of H2SO4 added with another 290ml of water.
The cost of 1 gram of isotopic copper can vary based on the isotopic composition and market conditions. Generally, isotopic copper can be much more expensive than regular copper due to the specialized production processes involved in isolating specific isotopes. Prices can range from hundreds to thousands of dollars per gram.
0,0135 g
Copper(II) sulfate contain 398,1339 g copper in 1 kg CuSO4.
Copper Sulphate is banned in most states. Very toxic stuff. Return the product to the store and get something less toxic and easier to use and that is adequate for the job. Such as Yellow Out or Yellow Treat. Both good products for a green pool.
You can boil the solution and collect and condense the water vapor until all of the water is gone. That will leave you with the solid copper sulphate. You will have to let the copper sulphate dry to remove all of the water.
Copper sulphate, otherwise known as bluestone, can be added to water to prevent algal growth but if too much is added will cause copper toxicity. It is also used in some countries at a 10% solution to treat for footrot and it used to be used at a 1% solution for deworming goats prior to the invention of safer more effective drenches.
maybe u put in too much water...try putting about 3ml and it will grow a lot more