0
We are using 5 percent solution of copper sulphate processing 140 ton per hour and consume 885 gm of copper sulphate per 1 ton of ore. what would be the usage of copper sulphate in liters per hour?
Wiki User
∙ 12y ago
885x140=123900grams of copper sulphate per hour. If you are talking about using 885 gm of copper sulphate per ton of ore in the solution then the density of the copper sulphate(penta hydrate now because it's in water) is 2.284 gm per cm3 so that's 2.284x5=11.42gm per liter of solution, so 123900/11.42=10849.387 liters of copper sulphate(pentahydrate) per hour, NOTE:this is only how much copper sulphate is being used total in the solution which is 30% of the total liters used of solution because 25% of the water is inside the copper sulphate, the other 70% is just water. If you want the liters per hour of solution total, it is 34964.62 litres per hour of your 5% solution. I hope this was what you were looking for, I saw noone had answered and decided to try and get you what you needed.
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
What is the percent of sulphur in ammonium sulphate?
The formula of ammonium sulphate is (NH4)2SO4, showing that each formula mass contains one sulphur atom. The formula mass of ammonium sulphate is 132.13, and the gram atomic mass of sulphur is 32.06. Therefore, the percent by mass of sulphur in ammonium sulphate is 100(32.06/132.13) or 24.26, to the justified number of significant digits.
A chemist has one solution that is 80 percent acid and another solution that is 30 percent acid How much of the first 80 percent solution is needed to make a 400 L solution that is 62 percent acid?
256 liters
How does Copper Sulfate react to carbon steel?
Copper sulphate solution testA simple 5 percent copper sulphate solution, applied in the same way as the water drop test, should confirm the differences between non-stainless steels and stainless steels. A metallic copper coloured deposit should form easily on non-stainless steels, but the solution should remain free of copper colour if the sample is a stainless steel.
A solution is saturated with dissolved minerals - what will happen if 50 percent of the water in the solution evaporated?
50 percent of the dissolved minerals will condense out of solution by crystallization.
What volume of 5 percent aluminum acetate solution will be needed if 120 ml of 0.05 percent solution is extemporaneously compounded for patient use?
12ml
A pharmacist mixed a 20 percent solution with a 30 percent solution to obtain 100 liters of a 24 percent solution How much of the 20 percent solution did the pharmacist use in the mixture?
A pharmacist mixed a 20 percent solution with a 30 percent solution to obtain 100 liters of a 24 percent solution. How much of the 20 percent solution did the pharmacist use in the mixture (in liters).
What is the percent of sulphur in ammonium sulphate?
The formula of ammonium sulphate is (NH4)2SO4, showing that each formula mass contains one sulphur atom. The formula mass of ammonium sulphate is 132.13, and the gram atomic mass of sulphur is 32.06. Therefore, the percent by mass of sulphur in ammonium sulphate is 100(32.06/132.13) or 24.26, to the justified number of significant digits.
How much 50 percent antifreeze solution and 40 percent antifreeze solution should be combined to give 50 gallons of 46 percent antifreeze solution?
How much 50 percent antifreeze solution and 40 percent antifreeze solution should be combined to give 50 gallons of 46 percent antifreeze solution?
What is the emperical formula of 25.3 percent Cu 12.9 percent S 25.7 percent O 36.1 percent water?
It is CuSO4.5H2O - cupric sulphate pentahydrate.
Pharmacist mixed a 20 percent solution with a 30 percent solution to obtain 100 liters of a 24 percent solution How much of the 20 percent solution did the pharmacist use in the mixture?
10
How much of a ten percent solution should be added to two cups of twenty percent solution to make a twelve percent solution?
2%
A chemist has one solution that is 80 percent acid and another solution that is 30 percent acid How much of the second 30 percent solution is needed to make a 400 L solution that is 62 percent acid?
144liters
A chemist is making 200 L of a solution that is 62 percent acid He is mixing an 80 percent acid solution with a 30 percent acid solution How much of the 80 percent acid solution will he use?
128 liters
Percents are often used to show the strength of solutions Which solution is stronger the 2 percent or the 3 percent?
A 3 percent solution is 1.5 times as strong as a 2 percent solution.
A chemist has one solution that is 80 percent acid and another solution that is 30 percent acid How much of the first 80 percent solution is needed to make a 400 L solution that is 62 percent acid?
256 liters
How many liters of a 50 percent alcohol solution must be mixed with 40 liters of a 90 percent solution to get a 60 percent solution?
mary mixed 2l of an 80% acid solution with 6l of a 20% acid solution. what was the percent of acid in the resulting mixture
How does Copper Sulfate react to carbon steel?
Copper sulphate solution testA simple 5 percent copper sulphate solution, applied in the same way as the water drop test, should confirm the differences between non-stainless steels and stainless steels. A metallic copper coloured deposit should form easily on non-stainless steels, but the solution should remain free of copper colour if the sample is a stainless steel.
