To prepare 1 liter of a 5% alcohol-water solution, you would mix 50 mL of alcohol with 950 mL of water. This ratio would give you a total volume of 1 liter with 5% of it being alcohol.
To prepare an ethanolic solution, simply mix ethanol (commonly known as alcohol) with a solvent such as water. The ratio of ethanol to water will determine the concentration of the solution. Be sure to measure the quantities accurately and mix well to ensure homogeneity.
Dissolve 30 g potassium hydroxide in 100 mL methylic alcohol.
dissolve 1.25g of cycloheximide in 10ml of alcohol or any desired solution. Now the concentration is 125mg / ml.
To prepare 100 ml of a 5% dextrose solution from a 50% dextrose solution, you would use the formula: C1V1 = C2V2. You will need 10 ml of the 50% solution (C1) and dilute it with 90 ml of water (V1) to obtain the desired 100 ml of 5% dextrose solution.
You need 50 g of this drug.
To prepare 1000 ml of 70% alcohol solution, you would need to mix 700 ml of 95% alcohol with 300 ml of water. Starting with a base of 95% alcohol ensures that the final solution will be at least 70% alcohol.
See the two Related Questions to the left for the answer.The first is how to prepare a solution starting with a solid substance (and dissolving it). The second question is how to prepare a solution by diluting another solution.
pharmacist
To prepare a 1% phenolphthalein solution in 2000mL, you would need to dissolve 20g of phenolphthalein in 2000mL of solvent (usually water or alcohol). This will result in a 1% solution by weight/volume. Remember to wear appropriate personal protective equipment and handle chemicals with care.
25
To prepare an ethanolic solution, simply mix ethanol (commonly known as alcohol) with a solvent such as water. The ratio of ethanol to water will determine the concentration of the solution. Be sure to measure the quantities accurately and mix well to ensure homogeneity.
Mix 1.6 L of 180 proof ethanol with 3.4L of H2O
125 ml 500(ml) * 0.05 = 25 25 / 0.20 = 125
To prepare 6 nM ammonium hydroxide a 30 percent solution you need to know the volume of the 30 percent solution that you have and the volume of 6nM solution you would like to make. Then use the following formula: C1V1 = C2V2 where C = concentration in moles/Liter and V = volume in liters.
Iodine monochloride is soluble in alcohol, ether, acetic acid. ICl is prepared from iodine and chlorine.
Dissolve 30 g potassium hydroxide in 100 mL methylic alcohol.
4314.9 grams