0
22 x 277 x 3 or 1.73 x 480 x 22 or more accurately: 22 x 277.1283 x 3 = 18.29 kW or 1.7320508 x 480 x 22 = 18.29 kW ---------------------------------------------------------------------------- Theory: S = Va Ia* = |Va| | Ia| = {|Vab| / }| Ia| = S Thus, S3 = 3 S = 3 {|Vab| / }| Ia| = |Vab| | Ia| ------------------------------------------------------------------------------- S = Va Ia* = |Va| | Ia| and S3 = 3 S ; 22 x 277.1283 x 3 = 18.29 kW or |Vab| | Ia| = 1.7320508 x 480 x 22 = 18.29 kW
What else can I help you with?
Could works a 500 watts of power and 3 phases motor with a wind generator?
Yes, but it would have to be a pretty big and expensive wind generator. You would need an inverter to produce at least 500 watts of 3 phase power. Unless you also had some big batteries, you could only run your motor when the wind is blowing!
How do you use a one phase motor in place of a three phase motor?
To use a single/one phase motor instead of a three phase motor is possible if you have a three phase power supply as you will only need to tap one of the three phases together with neutral and an earthwire, however to use a three phase motor instead of a single phase will require the provision of three phase power supply.
How do you calculate the phase current when working with a 10kw 3 phase electrical motor?
To calculate the phase current of a 10kW 3-phase motor, you can divide the total power (10kW) by the square root of 3 (approx. 1.732) and then divide that result by the line-to-line voltage. The formula is: Phase Current (Amps) = Power (W) / (√3 x Line-to-Line Voltage (V)).
How can a three phase induction motor reverse direction of travel without changing input phase?
A three-phase induction motor can reverse direction of travel by swapping any two of the three input phases. This changes the rotating magnetic field direction, causing the motor to rotate in the opposite direction. No change to the input phase sequence is required.
What is the simplest way to run a 3 phase 380 V motor of about 1 KW directly on 220 V single phase supply without resorting to rewinding or frequency converters?
You cannot run a three phase motor on single phase power. You'll burn the motor up within minutes. By the way, I've never seen or heard of a 380 volt motor. Do you mean a 480 volt motor? If so, the only way you can power it is with the correct full voltage and a 3 phase power supply.
How much kva is required to run a single phase 5hp motor using generator?
To answer this question the voltage of the motor is needed.
How do you turn a 3 phase motor in to a generator?
We can convert a 3 phase ac motor into generator by changing phase sequence of the ac input cable of that motor
What type of converter is required to act a sedc motor as a generator?
single phase fully control converter
What generator is suitable for a 2 HP single phase motor?
Any single-phase a.c. generator producing more than 2.5 HP or 2 kW - at the required voltage.
How do you reverse single phase ac motor to generator?
how reversing an ac single phase induction motor to wark as induction generator
How do you calculate the number of turns that are required for the coils of three phase AC motor?
There is software that can be downloaded to help calculate the number of turns for a three phase motor. There are also diagrams which can be found for the most frequently used calculations.
Can you run a three phase motor with single phase generator with help of phase converter?
Terminology gets misapplied but a 3-phase converter produces a 3 phase supply from a single phase supply. The only proviso is that generator, converter and motor are all suitably rated and compatible.
How do you convert or rewire a 20HP 3 phase motor to single phase motor?
The winding design of the motor will not economically allow this to work. You would have to drive a 3 phase generator to supply it.
Can a diesel generator for elevators run on single phase?
If the elevator has a single-phase motor, the diesel generator can also be single phase provided the voltage and VA ratings are compatible.
How to build a Rotary phase converter?
A simple Rotary phase converter is just a motor generator set. An electric motor running on the input voltage/current/phase/frequency. it drives a generator that supplies a different voltage/current/phase/frequency. So an electric motor and an electric generator connected together mechanically, either on the same shaft, or via gears, constitutes a Rotary phase converter. the above is incorrect, the motor/generator is the same motor, just one 3 phase motor is needed, it will run on T1 and T2, and put out L1, L2, and L3. You just need to know how to wire it up and what to do to get it to spin over on simple single phase 220, it will create three phase 220.
Will a 208 volt 3 phase generator supply operate a 230 volt 3 phase motor?
Yes, but the motor's horsepower rating will not be reached.
What is the theory of conversion of AC to DC using 3-phase induction motor and DC shunt generator?
The theory of converting AC to DC using a 3-phase induction motor and a DC shunt generator involves utilizing the induction motor to mechanically drive the shunt generator. When the induction motor is powered by a three-phase AC supply, it operates and drives the rotor of the connected DC shunt generator. This generator then converts the mechanical energy into electrical energy, producing a DC output. The process allows for efficient conversion of AC to DC, leveraging the motor's mechanical properties and the generator's electrical characteristics.
