No. Unfortunately every country has different electrical standards. In North America the electrical standard is of 110-120 volts at a frequency of 60 Hz
in Australia most homes are single phase 240 volts but when measured with a multi meter sometimes you get readings of between 230 and 250 volts
Yes, 220 volts is in the same voltage classification as 230 volts.
The classification of 230 volts is in the low voltage range.
The standard voltage for electricity supply in household buildings in Singapore is 230 volts.
In North America you can not obtain 230 volts from just one single pole breaker. The distribution is like this, from a one pole breaker to neutral is 120 volts. From an adjacent breaker to neutral is 120 volts. From the adjacent breaker to adjacent breaker (breakers situated beside each other) the voltage will be 230 volts.If you want to incorporate a 120 to 230 volt transformer into the circuit you can obtain 230 volts. The primary side of the transformer will be connected to the 120 volt circuit and the secondary side of the transformer will output 230 volts. The transformer must be sized to the load amperage or the load wattage of the connected 230 volt load.
230 volts
230 volts
in Australia most homes are single phase 240 volts but when measured with a multi meter sometimes you get readings of between 230 and 250 volts
the volts are 230
230 Volts
No, you will not obtain 230 volts. From a wye connected three phase 480 volt supply, 277 volts can be obtained from one phase leg and the neutral on the wye connection. 480 volts/1.73 (sq. root of 3) = 277 volts.
230 volts
230 volts.
Yes, 220 volts is in the same voltage classification as 230 volts.
0.0005
230 volts
That depends on what the suply is if your power suply is 230 then you run it on 230.