The formula you are looking for is W = Amps x Volts. Find the amperage and voltage that is on the nameplate of the HPS fixture's ballast.
About 150 watts.
compare to different lamps mv lamp,hpsv lamps & cfl lamp these are how mush energy comsumed for 225w lamp
No, you cannot use a 1000 watt HPS (high-pressure sodium) lamp without a ballast. The ballast is essential for regulating the electrical current flowing through the lamp, which is necessary for it to operate properly and prevent damage. Trying to operate a 1000 watt HPS lamp without a ballast can result in the lamp not lighting up or malfunctioning.
A ballast typically uses around 5-10 watts of power. In this case, a 150 watt HPS bulb will consume 150 watts of power when turned on. So, in total, the ballast and the bulb together will use around 155-160 watts.
pro-grow 180's four of them is exactly 600 watts draw powder from the plug, it will give you good spread and watts.
It will not. A HPS lamp has a much lower ignition current than a MH lamp. There are lamps called "multi-vapor' "MVH" that will work in a MH luminaire. you can run metal halide in hps but not hps in halides.
Yes the ballast and starter are the same you can run halide in hps, but not hps in halide.
About 150 watts.
compare to different lamps mv lamp,hpsv lamps & cfl lamp these are how mush energy comsumed for 225w lamp
No, the ballast has to be matched to the lamp. 250 watt ballast, 250 watt lamp. Also be sure to match the lamp type to the proper ballast even though the wattage is the same. HPS ballast to HPS lamp, Metal halide ballast to metal halide lamp and mercury vapour lamp to mercury vapour ballast.
No, you cannot use a 1000 watt HPS (high-pressure sodium) lamp without a ballast. The ballast is essential for regulating the electrical current flowing through the lamp, which is necessary for it to operate properly and prevent damage. Trying to operate a 1000 watt HPS lamp without a ballast can result in the lamp not lighting up or malfunctioning.
A ballast typically uses around 5-10 watts of power. In this case, a 150 watt HPS bulb will consume 150 watts of power when turned on. So, in total, the ballast and the bulb together will use around 155-160 watts.
To grow marijuana in the vegetative stage. HPS for flowering
220 lumens is equal to a tungsten incandescent light bulb of 15 watts. Halogen lamp 20 watts. Fluorescent lamp 60 watts. LED lamp 60 watts. high pressure sodium vapour lamp 117 watts. Mercury vapour lamp 50 watts or 17.32 candle power
A lamp post produces exactly zero watts, just like my computer produces zero watts. It is a user of electricity, not a producer. The amount of electricity used will depend on the bulb that is used in the lamp post.
pro-grow 180's four of them is exactly 600 watts draw powder from the plug, it will give you good spread and watts.
The abbreviations are CFL - Compact Fluorescent Lamp, MHL - Metal Halide Lamp, HPMV - High Pressure Mercury Vapor, and one more is HPS - High Pressure Sodium lamp