basically electricity rules the world through electrons...it creates the deficiency of electrons in an object(conductor1) which in turn when touched with the other conductor2 results the flow of free electrons from conductor2 to conductor1..analogous to chemical reaction.
the earth surface contains a variety of free electrons moving randomly..
the high voltage line when touches earth, the free electrons start flowing from earth to the high voltage line with a very large number of electrons and high speed..
if the line is thick(valuable size) and if there is some resistance to the flow of electrons then there would be no problem of line breaking but otherwise high speed electrons in very short duration of time when passes through a very low capacity conductor supporting less number of electrons to flow through will heat up the connecting(touching) point of conductor (analogous to welding) and will break it..
any problem.....
engr shahid
shahid_668@Yahoo.com
thanks
For a circuit, you usually need: * Conducting wires, or some other conductor to carry the current * A current source, for example a battery * A load (something that uses the power) * A switch that lets you disconnect the current flow
The three basic elements of electricity are voltage, current, and resistance. Voltage is the force or pressure that drives the electrical current. Current is the flow of electric charge. Resistance is the opposition to the flow of electric current.
The three ways to measure electricity in a circuit are voltage, current, and resistance. Voltage is the measure of electrical potential difference between two points, current is the flow of electric charge in a circuit, and resistance is the opposition to the flow of current.
A circuit needs at least three electrical contacs.
It depends on the power draw of each electric heater. Make sure to check the amp rating of each heater and ensure that the total amperage of all three heaters does not exceed the circuit's 50A capacity to prevent tripping the main breaker.
Voltage, frequency, current, impedance, and what the circuit is supposed to do are all important.
Three appliances that use the heating effect of electric circuits are electric stoves, electric heaters, and toaster ovens. These appliances utilize the electrical resistance in a circuit to generate heat for cooking or warming purposes.
Three things that an electrical circuit must have to operate is, A) a source. Example- battery B) a line. Example- conducting wires that allow the electricity to pass through and C) a load. Example- A light bulb
your mama boo
neutrons
The basic three electrical quantities are voltage (V), current (I), and resistance (R). Voltage is the electrical force that moves an electric charge. Current is the flow of electric charge. Resistance is the opposition to the flow of electric current.
When looking for three-wheel electric trikes for adults, consider features such as a sturdy frame for stability, a powerful motor for smooth rides, and adjustable seating for comfort.
Resistors are one of the three basic electronic components. They restrict the flow of current in an electrical circuit. Fixed resistors have a fixed value of resistance, and are used in almost every electronic circuit for lots of different reasons.
There are three effects produced by an electric current:heating effectmagnetic effectchemical effect
A Y current is the electric current through one branch of the star arrangement of a three-phase circuit.
There are three effects produced by an electric current:heating effectmagnetic effectchemical effect
For a circuit, you usually need: * Conducting wires, or some other conductor to carry the current * A current source, for example a battery * A load (something that uses the power) * A switch that lets you disconnect the current flow