Bus 22 connects to the Southbridge area.
For a typical 12-2 wire, the black wire is the "hot" wire that connects to the breaker, the white wire is the neutral wire that connects to the neutral bus bar, and the bare copper wire is the ground wire that connects to the ground bus bar in the circuit panel.
On a 15 amp household breaker there is no terminal on the in feed of the breaker. The breaker either plugs into the distribution panel's bus bar or it bolts to the distribution's bus bars. The feed conductor connects to the load side of the breaker at its terminal lug.
whatarethetypeoftopology Network topology is a layout which shows that how a connectivity communicates and the flow takes place in a network. types of topology are 1. BUS topology,2. Star topology,3. ring topology.
The bus between the CPU and memory on the motherboard. Also called the memory bus, front-side bus, local bus, or host bus.
Hunstanton can be accessed by car via the A149 coastal road. It is also served by the Hunstanton railway station, which connects to King's Lynn. Additionally, there are bus services that operate to and from Hunstanton, providing connections to nearby towns and villages.
The north and south bridge refer to the data channels to the CPU. The memory goes to CPU using the north bridge. And the mouse, keyboard, CD ROM, HDD, ext data flows to the CPU using the southbridge. The northbridge is the portion of the chipset HUB that connects faster I/O buses (for example, an AGP bus) to the system bus. Northbridge chip tends to be larger than the southbridge chip. The southbridge is the HUB that connects to slower I/O buses (for example, an ISA bus) to the system bus. The Northbridge and the Southbridge are known as the chipset on the motherboard. These set of chips collectively control the memory cache, external bus, and some peripherals. There is a fast end of the hub, and there is a slow end of the hub. The fast end of the hub is the Northbridge, containing the graphics and memory controller connecting to the system bus. The slower end of the hub is the Southbridge, containing the I/O controller hub.
NorthBridge
This sounds like a disk controller and possibly an I/O port. A disk drive has to have a controller. The controller is connected to the system bus or the southbridge chip, and that is how it is connected to the rest of the system. The controller uses a driver to tell the operating system how to communicate with it.If you mean further back than that, then you may be referring to the chipset chips. There is a northbridge and a southbridge, and it is the southbridge that connects to the peripheral bus and to any disk controllers.
Output devices are connected to the CPU through the northbridge and southbridge, (collectively called the chipset) but they connect to different devices. The northbridge connects to the graphics output, while the southbridge connects to all other output devices (sound, storage, network, and others).
Outside of the CPU and the memory, the two main chips on the motherboard are the Northbridge and the Southbridge. Traditionally, the Northbridge contained the AGP controller, the memory controller, and the bus to the CPU. It is also connected to the Southbridge which is connected to the peripheral bus, the BIOS, the front panel, the keyboard, sound, and the hard drive controller. So functionally speaking, the Northbridge is closest to the CPU and the memory, and the Southbridge is closest to the user.
I am not familiar with the term north pole or south pole in relation to a computer motherboard, and think it likely that the question refers to the north bridge and south bridge instead.The north and south bridges are parts of the chipset, which connects the CPU with memory, other direct main bus users (such as advanced graphics cards), and peripheral components.The north bridge provides a bus arbitration service between high performance components (CPU, memory, GPU), while the southbridge provides connectivity to other busses, such as the USB, PCI or IDE bus. In a graphical arrangement with the lesser peripheral components at the bottom of a drawing and the CPU on drawn on top, the northbridge is directly connected to the CPU and, therefore, resides "in the north." The southbridge itself connects to the northbridge, and in the drawing resides "further south."Northbridge and southbridge are conceptual ideas, and may not be implemented as dedicated chips in modern chipsets.
I am not familiar with the term north pole or south pole in relation to a computer motherboard, and think it likely that the question refers to the north bridge and south bridge instead.The north and south bridges are parts of the chipset, which connects the CPU with memory, other direct main bus users (such as advanced graphics cards), and peripheral components.The north bridge provides a bus arbitration service between high performance components (CPU, memory, GPU), while the southbridge provides connectivity to other busses, such as the USB, PCI or IDE bus. In a graphical arrangement with the lesser peripheral components at the bottom of a drawing and the CPU on drawn on top, the northbridge is directly connected to the CPU and, therefore, resides "in the north." The southbridge itself connects to the northbridge, and in the drawing resides "further south."Northbridge and southbridge are conceptual ideas, and may not be implemented as dedicated chips in modern chipsets.
A generator bus is the bus that connects the generator to it's generating transformer.
A generator bus is the bus that connects the generator to it's generating transformer.
Typically, a PCI express x16 slot, where your graphics card is installed, is connected to the Northbridge, or in some occasions, to the CPU directly. Most other expansion cards run through the Southbridge. The northbridge has the shortest route to the CPU, making it the fastest. Used for AGP / PCI express graphics and RAM. Southbridge has the longest route to the CPU, so slower devices, such as IDE/SATA, USB, PCI all go through the southbridge. Hope this helps.
system bus
Bus Topology.