0
What else can I help you with?
What are the differences between DC wire and AC wire, and how do these differences impact their performance in electrical systems?
DC wire and AC wire differ in their ability to carry direct current (DC) and alternating current (AC) respectively. DC wire is designed to carry a constant flow of current in one direction, while AC wire is able to handle the rapid changes in current direction that occur in an AC system. These differences impact their performance in electrical systems as DC wire is more efficient for transmitting power over long distances with minimal loss, while AC wire is better suited for powering devices that require frequent changes in current direction, such as household appliances.
What is the wire size for a 35 amp breaker to a ac unit?
You will need to use #8 wire.
Why neutral wire does not carry current in closed ac circuit?
The neutral wire does carry current in a closed AC circuit. Clamp a clamp on amp meter around the neutral wire directly after the circuit load and it will read the same current as is on the "hot" wire.
What is the wire size for 50 amp breaker to ac unit?
For a 50 amp breaker to an AC unit, you would typically use 6-gauge wire. It is important to consult local electrical codes and the manufacturer's specifications for the AC unit to ensure the correct wire size is used for safety and proper operation.
How do you hook up a gfi recepticale to a three wire?
To hook up a GFCI receptacle with three wires, you would typically connect the black wire to the "hot" terminal, the white wire to the "neutral" terminal, and the bare/green wire to the "ground" terminal on the GFCI receptacle. Make sure to follow the manufacturer's instructions and turn off power to the circuit before starting any electrical work.
Can you hook copper wire to other wire?
Yes
If you are trying to hook up a tach to your '90 Bonneville which wire should you hook it up to to get an rpm reading?
to hook up the tach use the hot lead on the disributor and to any good ground wire and if there is a light hook it to the wire on you light switch
What is the recommended wire size for an AC unit installation?
The recommended wire size for an AC unit installation is typically 10-gauge wire.
Do you hook up the ground wire first to an amp?
No. Hook up the power wire first, then the ground wire. The ground wire is what acutually draws the power to the unit. As you will notice the power wont turn on if just the power wire is plugged in..
How do you hook up pro tach rpm gauge on a 1982 ford F-150 pickup?
Hook up the red wire to the fuse box or another wire that gives power when the key is on. Hook up the white wire to a wire coming out of the headlight switch. This will make is so that when you turn your headlights on, the light will come on on the tach. If you don't mind the light on the tach being on all the time then just hook it to another power wire. Hook the black wire to a ground like a screw or a bolt. The green wire is the signal wire. Run it through your fire wall. Hook it up to the negative side of the coil. There will be a negative sign on the coil denoting the correct side.
What wire do you hook into your o2 sensor it has 4 wires im trying 2 hook up an air fuel mix gauge?
the purple wire
How do you get a fish hook out of a dogs mouth?
Cut off the eye of the hook with some wire cutters and then pull the hook through.
What wire do you hook to on the o2 sensorto install a air fuel gauge on a 93 Honda civic?
you hook it up to the white wire that comes out of your O2 sensor
What if you have an orange wire left and nothing to hook it on to?
hook it to the other orange it controls ur dash lights
What is hook up wire?
Hook-up wire is small-to-medium gauge, solid or stranded, insulated wire, used for making internal connections inside electrical or electronic devices. It is often tin-plated to facilitate soldering.
Where does the Exiter wire hook on a 1989 gm 350?
alternator
What battery wire to you hook up first in a car battery?
Hook positive up first, negative last.
