0
What else can I help you with?
How will you separate a mixture of salt and sand will it be different if the mixture consists of iron filling instead of salt explain?
To separate a mixture of salt and sand, you can use the method of dissolving the salt in water and then filtering the sand out. If the mixture consists of iron filings instead of salt, you can use a magnet to attract and separate the iron filings from the sand. This method works since iron is magnetic while sand is not.
A container contains a mixture of sand salt and pebbles . How can each substance be separated from the others?
To separate the mixture of sand, salt, and pebbles, you can use a series of physical methods. First, use a sieve to remove the pebbles from the mixture, as they are larger than the sand and salt. Next, add water to the remaining sand and salt mixture; the salt will dissolve while the sand will settle at the bottom. Finally, filter the mixture to separate the sand from the saltwater solution, and then evaporate the water to obtain the salt.
Describe how you will attempt to recover pure common salt from a mixture of sand common salt and ammonium chloride?
To recover pure common salt from a mixture of sand, common salt, and ammonium chloride, I would first dissolve the mixture in water, allowing the common salt and ammonium chloride to dissolve while the sand remains insoluble. Next, I would filter the solution to separate the sand from the salt solution. Then, I would gently heat the salt solution to evaporate the water, leaving behind pure common salt as a solid residue. The remaining ammonium chloride can be removed by sublimation if needed, but this step is optional depending on the desired purity.
What is the correct order for obtainingsalt from a mixture of sand and salt?
To obtain salt from a mixture of sand and salt, start by adding water to dissolve the salt, leaving the sand behind. Next, filter the mixture using a filter paper and funnel to separate the sand from the saltwater solution. Finally, evaporate the water from the saltwater solution to obtain the salt as solid crystals.
How to separate salt and sand from water and calculate the percent of mass?
You add water to the container then you stir, the water and salt would form a solution and sand would settle on the bottom of the container. You get another container and place on a filter paper then you pour the water into it, which would lead to the sand staying in the filter paper and the solution, which is made of salt and water, would be left. Finally, you place the container on a source of heat which will cause the water to evaporate and salt staying in the container. Now weigh the residue and find the percentage.
Is sand and salt mixture a mixture of homogeneous?
Salt and sand is a mixture.
How do you separate sand from salt?
You place the salt / sand mixture in warm water. The salt will dissolve in the water and you than then four the salt solution off the sand, leaning just sand. Then boil the salt solution untill all the water evaporates, leaving the salt.
How would you separate a mixture of sand an salt?
Pour water into the mixture, let the salt dissolve.Then, put the wet-salty water-sand mixture through a sifter/filter.Take out the sand from the filter and dry it. COMPONENT 1 - SANDBoil the salt water solution and evaporate the water. The residue will be salt. COMPONENT 2 SALTDissolve the mixture in water first, before filtering the resultant solution. The residue is the sand, while the filtrate is the salt solution.
Is sand and salt a mixture or a solution?
Mixture
Is mixture of sand and salt classify as heterogeneous or homogeneous?
Sand+salt: a heterogeneous mixture.
How will you separate a mixture of salt and sand will it be different if the mixture consists of iron filling instead of salt explain?
To separate a mixture of salt and sand, you can use the method of dissolving the salt in water and then filtering the sand out. If the mixture consists of iron filings instead of salt, you can use a magnet to attract and separate the iron filings from the sand. This method works since iron is magnetic while sand is not.
How can you physically separate a mixture of iron fillings table salt and white sand?
by putting all of the substances on a sheet or plate and then using a magnet underneath to pull the iron fillings away. then for your table salt and white sand you just use small mesh and voila! all wrong ... 1st, use magnet to separate the iron filling from the mixture of sand with table salt 2nd add water to dissolve the salt from the mixture with the sand and filtrate the liquid sand has separated from mixture of salt 3rd place the the filtrate liquid to a burner with a evaporating dish, the water will be evaporate and the remaining residue would be the small crystal particles which is the salt.
How do you Separate a of mixture of sand and salt?
Put the mixture in water and wait for all of the salt to dissolve. Then filter out the sand and wait for the water to evaporate in the sand/water solution to get the sand and salt separately.
How do you separate a mixture of iodine salt and sand?
First heat the mixture; the iodine will sublime and turn to a vapor which can be collected. Then add water to the remaining salt/sand mixture; the salt will dissolve but the sand will not. Finally, evaporate the water to obtain the solid salt.
A container contains a mixture of sand salt and pebbles . How can each substance be separated from the others?
To separate the mixture of sand, salt, and pebbles, you can use a series of physical methods. First, use a sieve to remove the pebbles from the mixture, as they are larger than the sand and salt. Next, add water to the remaining sand and salt mixture; the salt will dissolve while the sand will settle at the bottom. Finally, filter the mixture to separate the sand from the saltwater solution, and then evaporate the water to obtain the salt.
What happen when sand and salt mix?
You get a mixture of salt and sand. Nothing more happens.
Why do you separate a mixture of salt water and sand?
Since salt is soluble in water then you have to separate the mixture from sand first and this is done by filtration. The sand will be left in the filter paper and the filtererd solution would be that of salt and water. To get the salt you would then have to heat the solution and the water will evaporate leaving the salt behind.Filter Paper
