answersLogoWhite

0

A burette is a glass tube with fine gradations and a stopcock at the bottom, used in laboratory procedures for accurate fluid dispensing and titration.

User Avatar

Wiki User

9y ago

What else can I help you with?

Continue Learning about Natural Sciences

How do tighten burette clamp on?

To tighten a burette clamp, adjust the screw on the clamp to apply pressure on the burette. Turn the screw clockwise to securely hold the burette in place. Make sure the burette is held firmly but not over-tightened to avoid damaging the glassware.


How do you clean pipette?

First remove all the solid particles from the burette using a scrubber. Then wash the burette with tap water followed by distilled water thoroughly (even the nozzle). Then wash the burette with the solution to be used in the burette.


What is the use of a burrtte clamp?

A burette clamp is used to secure and support a burette during titration experiments in chemistry. It helps to hold the burette in place so that accurate measurements can be taken easily and without the risk of it slipping or falling.


Experimental report of unreliability index of 25ml burette?

The experimental report on the unreliability index of a 25ml burette would include details on the precision and accuracy of volume measurements taken with the burette. It would analyze factors such as calibration, parallax error, and repeatability to determine the level of reliability in the measurements. Recommendations for reducing unreliability, such as calibrating the burette regularly and minimizing systematic errors, would also be included.


Why is it important to fill the part below he tap of the burette?

It is important to fill below the tap of the burette to prevent air bubbles from entering the burette's delivery jet and affecting the accuracy of the volume measurements. Filling below the tap also ensures a consistent and accurate starting point for titrations.

Related Questions

How do tighten burette clamp on?

To tighten a burette clamp, adjust the screw on the clamp to apply pressure on the burette. Turn the screw clockwise to securely hold the burette in place. Make sure the burette is held firmly but not over-tightened to avoid damaging the glassware.


What instruments holds the burette?

A ring clamp is used to hold a burette.


What is Relative standard uncertainty in burette?

The smallest possible burette reading is 0.10 and the uncertainty of a burette's reading is half of its smallest value (0.05).


What is is the use of burette holder in chemistry lab?

A burette holder is used in a chemistry lab to securely hold a burette in place during titration experiments. It prevents the burette from tipping over or falling, ensuring accurate and precise measurements of the volume of liquid being dispensed.


What is the pupose of a burette?

A burette is used to very accurately measure liquid volumes.


How do you clean pipette?

First remove all the solid particles from the burette using a scrubber. Then wash the burette with tap water followed by distilled water thoroughly (even the nozzle). Then wash the burette with the solution to be used in the burette.


What is the curved surface of water in a burette called?

The curved surface of water in a burette is called the meniscus. It is caused by the surface tension of the water interacting with the walls of the burette.


What is the quantity measured by a burette?

A burette is used to measure the volume of a liquid being dispensed or transferred.


What is the proper technique for filling a burette tip to ensure accurate measurements in a laboratory setting?

To ensure accurate measurements when filling a burette tip in a laboratory setting, the proper technique involves slowly and carefully filling the burette tip with the liquid being measured, making sure there are no air bubbles present. This can be done by allowing the liquid to flow down the sides of the burette tip and tapping the burette gently to release any trapped air bubbles. It is important to stop filling the burette when the liquid level is at the zero mark on the burette scale to ensure precise measurements.


Is there any interesting info on a burette?

burette, noun a graduated glass tube with a tap at one end, for delivering known volumes of a liquid, esp. in titrations. http://en.wikipedia.org/wiki/Burette


What is the purpose rinsing the burette with distilled water during titration?

Rinsing the burette with distilled water helps to remove any impurities or residue that may be present inside the burette. This ensures that there are no contaminants that could affect the accuracy of the titration results.


What is the most accurate way to measure volume?

using pycnometry because the density of water is very accurate