This is short for 12 Volts, 60 VoltAmps. VoltAmps are the same as Watts, but used for AC equipment.
12 V DC, 18 VA (watts) how many amps? Formula: amperage I = power P (VA) divided by voltage V. So, amperage I = 18 watts / 12 volts = 0.083 amperes.
The relationship between volt-amperes (VA) and watts (W) depends on the power factor of the system. For purely resistive loads, 60 VA is equal to 60 watts. However, if the load has a power factor less than 1 (common in inductive loads), the actual wattage will be less than 60 watts. To convert VA to watts, you can use the formula: Watts = VA × Power Factor.
Enough to make your mother’s panties drop on the floor.
To calculate the amperes for a fluorescent lamp using VA (volt-ampere), you can divide the VA rating by the voltage of the lamp. The formula is: Amperes = VA / Voltage. For example, if a fluorescent lamp has a VA rating of 60 VA and operates at 120 volts, the amperes would be 0.5A (60 VA / 120V).
12V-20VA means the device requires a voltage input of 12 volts with a maximum current draw of 20 volts-amps (VA). This rating helps ensure that the power supply can deliver enough current to power the device effectively without damaging it.
Yes, 12 v 5 a is 60 va, and it does not matter if it is ac or dc voltage.
A: The VA rating is there 6v/a the power fuse to blow is 6watts. 050a fuse
about 60 minutes
60 miles
The distance between Charlottesville, VA and Lynchburg, VA is approximately 60 miles.
Charlottesville, VA, is approximately 60 miles southwest of Lexington, VA. The drive typically takes about an hour and a half, depending on traffic and road conditions. The most common route is via Interstate 64 and US-60.
If that is meant to be $20 000 then: 60%x20 000=$12000 If it is meant to mean $20.00 then: 60%x20=$12.00
12 V DC, 18 VA (watts) how many amps? Formula: amperage I = power P (VA) divided by voltage V. So, amperage I = 18 watts / 12 volts = 0.083 amperes.
about 60 miles
Considering one LED: 12V x 20mA = (12) x (0.02) = 0.24 watt If LEDs are identical, and every one of them draws exactly 20 mA at 12V, then 60 of them want to dissipate 60 x (0.24 watt) = 14.4 watts . A power supply rated 12 watts will sag in voltage, or, if regulated, will get quite toasty, and is likely to fail.
assuming 60 k is meant to be 60 km 37.28 miles
The relationship between volt-amperes (VA) and watts (W) depends on the power factor of the system. For purely resistive loads, 60 VA is equal to 60 watts. However, if the load has a power factor less than 1 (common in inductive loads), the actual wattage will be less than 60 watts. To convert VA to watts, you can use the formula: Watts = VA × Power Factor.