0
The amp rating of ACSR (Aluminum Conductor Steel Reinforced) conductors, including the 2 ACSR aluminum, depends on various factors such as the conductor's size, installation conditions, and ambient temperature. Typically, a standard 2 ACSR conductor can carry anywhere from 100 to 200 amps, but it is essential to consult specific manufacturer data or industry standards for precise ratings based on the application and environmental conditions. Always consider derating factors for accurate assessments.
What else can I help you with?
What size aluminum ser cable needed for 100 amp sub panel?
For a 100 amp sub panel, you would typically need a 2-2-2-4 aluminum SER cable. This cable consists of three insulated conductors (two hot and one neutral) and one bare ground wire. It is important to always consult your local electrical code and a qualified electrician to ensure you have the correct size and type of cable for your specific installation.
Can a 5 volt 2 amp charger be used to charge a 5 volt 1.6 amp battery?
Yes, it can be used to charge that battery. The chargers rating, 2 amps, is the maximum that can be drawn from it.
Can a 350 watt amp power 2 12s?
It depends on the power and impedance rating of the 12-inch speakers. If both speakers are rated for 175 watts and the amp can handle the impedance of the speakers, then the 350 watt amp should be able to power both speakers effectively.
What is the fuse rating for a 400 watt appliance?
The fuse rating for a 400-watt appliance can be calculated using the formula: Fuse Rating (Amps) = Power (Watts) / Voltage (Volts). For a standard voltage of 230 volts, the fuse rating would be approximately 1.74 amps, so a 2-amp fuse would typically be suitable. If the appliance operates at 120 volts, the fuse rating would be around 3.33 amps, suggesting a 4-amp fuse would be appropriate. Always check the manufacturer's specifications for the exact fuse rating.
What size service cable would you need for a 200 amp service?
For a 200 amp service, you would typically need a service cable with a minimum size of 2/0 AWG copper or 4/0 AWG aluminum to safely handle the current. It's important to check local building codes and consult with a licensed electrician to ensure compliance and safety.
What is the maximum amp rating for a device that is designed to handle a 10-2 amp rating?
The maximum amp rating for a device designed to handle a 10-2 amp rating is 10 amps.
What is the amp rating for 10-2 wire?
The amp rating for 10-2 wire is typically around 30 amps.
What is the amp rating for 10/2 wire?
The amp rating for 10/2 wire is typically around 30 amps.
What is the amp rating for a 14 2 wire?
The amp rating for a 14 2 wire is typically around 15 amps.
What is the amp rating of 14/2 Romex cable?
The amp rating of 14/2 Romex cable is typically 15 amps.
What size aluminum cable for 100 amp service?
2 AWG Aluminum.
What is the 6/3 amp rating for this electrical appliance?
The 6/3 amp rating for this electrical appliance is 2 amps.
What is the maximum current rating of a 2 pole 25 amp breaker?
The maximum current rating of a 2 pole 25 amp breaker is 25 amps.
What is the maximum current rating of a 2 pole 60 amp breaker?
The maximum current rating of a 2 pole 60 amp breaker is 60 amps.
What size aluminum entrance cable for 100 Amp service?
2 AWG Aluminum.
What is the 10/2 amp rating for this electrical appliance?
The 10/2 amp rating for this electrical appliance means it can handle a maximum current of 10 amps and a continuous current of 2 amps.
What is the recommended aluminum wire size for a 200 amp service?
The recommended aluminum wire size for a 200 amp service is typically 2/0 AWG.
