answersLogoWhite

0

The excess heat removed by a condenser is the heat absorbed by the refrigerant in the evaporator plus the heat of compression in the compressor. The condenser releases this heat to the outside environment, allowing the refrigerant to return to its liquid state.

User Avatar

AnswerBot

1y ago

What else can I help you with?

Related Questions

When is the most heat removed from refrigerant in the condensing process?

When the temperature of the air passing over the condenser is very low. Ex: Home A/c with out condenser, More heat can be removed if the out door ambient is 60f compared to 90f. Efficiency also increases with this.


When should refrigerant be removed from the condenser outlet?

Refrigerant should be removed from the condenser outlet when:


If 10 lb of water passes through the condenser with an entering temperature of 80 degrees Fahrenheit the temperature of the water leaving the condenser is what?

The temperature of the water leaving the condenser would depend on the amount of heat removed from the water in the condenser. Without this information, it is not possible to accurately determine the temperature of the water leaving the condenser.


When is the most heat removed from the refrigerant in the condensing progress?

The most heat is removed from the refrigerant during the condensing process when it changes from a gas to a liquid state. This typically occurs in the condenser where the high-pressure, high-temperature refrigerant releases heat to the surroundings, causing it to condense.


Why does the largest heat loss occur in a condenser in regard to steam?

heat losses in condenser in percentage


What is the difference between surface condenser and overhead condenser?

Surface condenser is a heat exchanger in which latent heat only absorbed by the cooling media and heat exchange mostly takes place on availble just surface of the tube bundle. Overhead condenses is also a heat exchanger in which latent heat and somewhat sensible heat also removed from the fluid


Why would a refrigerator become hot on the outside?

A refrigerator might become hot on the outside if the condenser coils are dirty or blocked, preventing proper heat dissipation. This can cause the refrigerator to work harder to cool the interior, leading to excess heat on the exterior. Another reason could be a faulty condenser fan motor that is not adequately dissipating heat.


Funcation of condenser?

A condenser is used in refrigeration systems to remove heat from the refrigerant gas and convert it into a liquid state. This process helps to release excess heat produced during the refrigeration cycle and allows the refrigerant to circulate back to the evaporator for further cooling. The condenser plays a crucial role in maintaining the efficiency and proper functioning of the refrigeration system.


Does the condenser absorb thermal energy from refrigerated space and rejects it into the condensing medium?

Yes, the condenser absorbs thermal energy from the refrigerated space and then rejects it into the condensing medium, typically either air or water. This process helps release the heat that was removed from the refrigerated space when the refrigerant evaporated, allowing the refrigeration cycle to continue effectively.


After heat is absorbed into a condenser medium in a water cooled condenser the heat can be deposited in one of two places what are they?

The heat absorbed by the condenser medium in a water-cooled condenser can be deposited either into the environment through the cooling water, which carries the heat away from the system via a cooling tower, or into another part of the system to be reused for heating purposes, like in a heat exchanger for a district heating system.


What is heat reclaim?

Heat in the area, Heat made by a compressure or condenser to heat other stuff like a heater or heat water or heat air, Again heat made by the compressure or condenser to heat a area!


What is a condenser in heating and cooling?

A condenser is a form of heat exchanger. In the condenser, the coolant condenses from a gas to a liquid, and loses heat energy to the surroundings (like air being blown across it).