Surface condenser is a heat exchanger in which latent heat only absorbed by the cooling media and heat exchange mostly takes place on availble just surface of the tube bundle.
Overhead condenses is also a heat exchanger in which latent heat and somewhat sensible heat also removed from the fluid
The fins on the condenser increase the surface area available for heat transfer. This helps to efficiently dissipate heat from the refrigerant as it flows through the condenser coils, allowing it to cool down and change state from a gas to a liquid.
Reasons for low vacuum: 1. Low gland sealing pressure 2. Condenser tubes choked 3. Condenser cooling water temperature high 4. Leakage in condenser tubes 5. Less cooling water flow
Liquids with high surface tension have stronger forces between their molecules at the surface, causing them to form droplets and resist spreading. Liquids with low surface tension have weaker forces, allowing them to spread out more easily and wet surfaces.
At what height in kilometers above the surface of the Earth is there a 4% difference between the approximate gravitational force mg and the actual gravitational force on an object
The formula for calculating heat transfer by convection is: Q = h * A * ΔT, where Q is the heat transfer rate, h is the convection heat transfer coefficient, A is the surface area, and ΔT is the temperature difference between the surface and the surrounding fluid.
Amit
In distillation, water evaporates from the condenser due to a difference in temperature between the hot vapor coming from the boiling flask and the cold surface of the condenser. This temperature difference causes the water vapor to condense into liquid form on the condenser surface, resulting in the separation and collection of the distilled water.
the computer is the device. the computer surface is the surface it sits on
manila
the high efficiency is obtained by using a larger condenser surface or by using more mordern alloys with more extended surface or fins
the difference between this is that surface area
and what?
The difference between trail and road surface for running is that trail is usually dirt roads as opposed to tarred (tarmac) surfaces associated with road surfaces.
The difference between roughness and flatness is that one, flatness, is the shape of an object. Roughness is the surface or texture of an object.
If the vacuum in the surface condenser it very high, it results in higher practical thermal efficiency. It is important for you to keep the temperature to 100 Celsius or lower for it to work properly.
More surface area.
there is a difference between the types of plate movement and a difference in the distance from the Earth's surface.