0
What else can I help you with?
What is the hardness of a grade 2 washer?
A grade 2 washer typically has a hardness ranging from 80-100 Brinell. This hardness level makes it suitable for general-purpose applications where high strength is not required.
What grade is a bolt with hardness Rc 27-34?
A bolt with hardness Rc 27-34 falls under the Grade 5 category. Grade 5 bolts are medium carbon steel that is quenched and tempered for increased strength and hardness. They are commonly used in automotive and general engineering applications.
What grade copper used in rewinding transformers?
Copper with a purity of 99,99 %.
What is the difference between Copper- rich ores and Low - grade ores?
Copper rich ores contain Relatively large amount of copper. Copper obtained from rich ores is from better quality than low-grade ores. A low-grade ore doesn't contain very high proportion of valuable copper
What is the RC hardness of inconel?
Inconel typically has a Rockwell C (RC) hardness of around 20-35, depending on the specific grade and heat treatment.
What is the hardness of a grade 2 washer?
A grade 2 washer typically has a hardness ranging from 80-100 Brinell. This hardness level makes it suitable for general-purpose applications where high strength is not required.
What rockwell c hardness is grade 10.9?
The Rockwell C Hardness for a grade 10.9 fastener is 32 - 39HRC or 320 - 380Hv10
Does Jake in grade 5 at Vickers school love Jana morash?
yes
The grade of a fastener such as a bolt is a measure of its?
Hardness
Hardness of grade 5 bolts?
A grade 5 hardness bolt is a bolt made of medium carbon steel and depending on the manufacturer can either be or not heat treated.
What is 10.9 grade bolt hardness?
27 to 36
What grade is a bolt with hardness Rc 27-34?
A bolt with hardness Rc 27-34 falls under the Grade 5 category. Grade 5 bolts are medium carbon steel that is quenched and tempered for increased strength and hardness. They are commonly used in automotive and general engineering applications.
Difference between 10.9 and 12.9 tensile bolts?
Grade 10.9 bolts or capscrews have a minimum tensile strength of 1040N/mm2 and a hardness of 320 - 380Hv10. Grade 12.9 bolts or capscrews have a minimum tensile strength of 1220N/mm2 and a hardness of 385 - 435Hv10. The 12.9 fastener is therefore a higher grade (hardness and tensile strength) fastener compared with 10.9 grade
What grade copper used in rewinding transformers?
Copper with a purity of 99,99 %.
What is ec grade copper?
It is nothing but the ETP, Electrolytic Tough Pitch, Copper misspelled as Electrolytic Copper!
What is low grade copper ore and what are the problems associated with it?
Low-grade copper ore contains a small amount of copper (1% or lower) and a big amount of waste rock. The problem with low-grade copper is that it breaks down and melts more easily than copper ore.
What is the difference between Copper- rich ores and Low - grade ores?
Copper rich ores contain Relatively large amount of copper. Copper obtained from rich ores is from better quality than low-grade ores. A low-grade ore doesn't contain very high proportion of valuable copper
