We would need to know the path length and the molar extinction coefficient to answer that question. If you know these, it's an extremely simple matter of Beer's Law and algebra.
If you have a spectrofotometer ( the thing to mesure the absorbance) then play with the setting and use a maximum. this will lay close to your specific absorbance or take the pharmacopea or a MERCK index
In UV spectroscopy, the baseline refers to the horizontal line at zero absorbance on the absorbance axis. It represents the reference point for measuring the absorbance of the sample. The baseline should be stable and noise-free to ensure accurate measurement of the absorbance of the sample.
because that chart gives a more accurate value than the absorbance scale on the specthometor
You need a graphic concentration versus absorbance.
Absorbance and optical density (OD) are often used interchangeably to describe the light absorbance properties of a substance. However, technically, absorbance refers to the logarithm of the ratio of the intensity of light incident on a material to the intensity transmitted through the material, while OD specifically refers to the absorbance measured in a spectrophotometer at a specific wavelength.
"absorbance"Since in the experiment, you probably choose the wavelength, then measure the absorbance (absorption?, the absorbance is the dependent variable.
Blank Sample in Spectrophotometry is used to measure the absorbance of light without sample. It is subtracted from the total absorbance for measurement of Absorbance from a sample's absorbance.
specific absorbance- it is absorbance in a solution containing one gm of substance in 100 ml solvent in 1cm shell. so it is having a difference with absorbance which is negative logarithm of incident light to the transmitted light. divya.chakraborty@gmail.com
Absorbance is considered a continuous variable.
in primary light absorbed by outer molecule while in secondary re-absorbance occurs
If you have a spectrofotometer ( the thing to mesure the absorbance) then play with the setting and use a maximum. this will lay close to your specific absorbance or take the pharmacopea or a MERCK index
In UV spectroscopy, the baseline refers to the horizontal line at zero absorbance on the absorbance axis. It represents the reference point for measuring the absorbance of the sample. The baseline should be stable and noise-free to ensure accurate measurement of the absorbance of the sample.
A
In spectrophotometry, optical density (OD) and absorbance are directly related. As the OD increases, the absorbance also increases. This means that a higher OD value indicates a higher absorbance of light by the sample being measured.
because that chart gives a more accurate value than the absorbance scale on the specthometor
In a spectrophotometry experiment, there is an inverse relationship between wavelength and absorbance. This means that as the wavelength of light increases, the absorbance decreases, and vice versa.
In a graph, absorbance is typically shown on the y-axis and wavelength on the x-axis. The relationship between absorbance and wavelength is that as the wavelength of light increases, the absorbance generally decreases. This is because different substances absorb light at specific wavelengths, so the absorbance of a substance can vary depending on the wavelength of light being used.