Under normal circumstances, the relationship is given by Ohm's law
voltage = current x resistance.
The ratio of voltage to current is called resistance. This is obtained from the definition of the ohm, and not (as so often stated) from Ohm's Law.
If the ratio of voltage to current is constant for variations in voltage, then the load obeys Ohm's Law and is called a 'linear' or 'ohmic' load.
If the ratio of voltage to current changes for variations in voltage, then the load does NOT obey Ohm's Law, and is called 'non-linear' or 'non-ohmic'. Pure metal conductors ONLY obey Ohm's Law if their temperature is held constant. No semiconductor obeys Ohm's Law.
The three basic elements of electricity are voltage, current, and resistance. Voltage is the force or pressure that drives the electrical current. Current is the flow of electric charge. Resistance is the opposition to the flow of electric current.
Resistance(Ohms)= Voltage(volts)/Current (Ampheres) -X
The amount of current that will pass through a resistance is dependant upon the voltage applied across the resistance. Voltage devided by resistance equals current. This is Ohm's Law.
An increase in voltage or a decrease in resistance will cause an increase in current flow in a simple series circuit. This is because current is directly proportional to voltage and inversely proportional to resistance according to Ohm's Law.
Electric power is not defined as current divided by voltage. Electric power (Watts) is equal to amps times voltage
Ohm's Law: voltage = current * resistance. If resistance is a constant, then voltage is directly proportional to current.
voltage depend on current and resistance r.p.m depend on no of pole
Voltage = (current) x (resistance) Current = (voltage)/(resistance) Resistance = (voltage)/(current)
Voltage = (current) x (resistance) Current = (voltage)/(resistance) Resistance = (voltage)/(current)
Voltage = (current) x (resistance) Current = (voltage)/(resistance) Resistance = (voltage)/(current)
how do you use ohms law express conductance in terms of current and voltage?
One way to determine current is to measure it, with an ammeter. Another way is to calculate it using Ohm's law: current = voltage / resistance.
V=IR where V is the voltage (volts), I is current (amps) and R is resistance (ohms)
Voltage = Current x Resistance giving us Current = Voltage / Resistance i.e. Voltage divided by resistance
Ohm's law gives the relationship between current, voltage, and resistance. The law states that I=V/R, where I is current, V is voltage, and R is resistance. Source: university digital fundamentals
This is because the resistance is measured by applying a fixed voltage to the resistor and measuring the current. Since I = V/R, the current/resistance relation is non-linear.
Voltage = Current * Resistance (Ohm's law)