outer oxidising zone is the second most hottest part of burner flame....
The blue part of the flame, the cone in the middle is the hottest, the flame cools as it gets further away from the burning centre, this is similar to the sun where the outer surface of the sun is significantly cooler compared to the inside.
The coldest part of a Bunsen burner flame is at the very base, where there is incomplete combustion due to lack of oxygen. The inner blue cone is the hottest part of the flame, while the outer yellow flame is cooler.
The white colored flame is considered to be the hottest.
My teacher taught me it was the hottest at the end of the blue part of the flame.
The hottest part of a Bunsen flame is the blue inner cone.
Near the tip of a blue flame is the hottest.
The hottest part of the flame on a Bunsen burner is at the tip of the inner blue cone. This part of the flame is where combustion is most complete, resulting in the highest temperature.
The hottest part is where the flame is light blue or blue; which gradually turns to yellow as the flame is cooled by the colder outer air. When the safety flame (yellow) is on, the hottest point is the tip of this flame.
The inner blue part of the flame is the hottest on a Bunsen burner, as this is where complete combustion occurs due to the optimal air-to-gas ratio.
The tip of the blue cone is the hottest part of the Bunsen burner flame.
The white part of a flame on a Bunsen burner is called the inner cone. This part of the flame is the hottest and is where complete combustion of the fuel is occurring.
The blue part of the flame, the cone in the middle is the hottest, the flame cools as it gets further away from the burning centre, this is similar to the sun where the outer surface of the sun is significantly cooler compared to the inside.
The inner blue cone of the flame in a Bunsen burner is the hottest part, as it has the highest temperature and most complete combustion. This part of the flame is where the flame is the most efficient for heating purposes.
in bunsen burner complete combustion takes place,it produces blue flame and blue region is the hottest part of a flame.so the whole flame is very hot,either the outermost part of flame.
yes there is a flame at the top of a Bunsen burner. there are three different types light blue blue and yellow
The blue flame of a Bunsen burner is the hottest part of the flame, making it ideal for heating and sterilizing purposes in a laboratory setting. The blue flame indicates complete combustion of the gas, leading to a cleaner and more efficient burn.
No, the blue part is the hottest. In fact, you should adjust the burner so that you only have a blue flame. A yellow/orange/red flame is indicative of incomplete combustion (generating carbon monoxide).