In the fire
The blue flame on a Bunsen burner is the hottest because it is a complete combustion of gas with the right mixture of air. The blue color indicates that the flame has enough oxygen for efficient combustion, resulting in higher temperatures compared to a yellow flame.
in bunsen burner complete combustion takes place,it produces blue flame and blue region is the hottest part of a flame.so the whole flame is very hot,either the outermost part of flame.
The two energy regions in a Bunsen burner are the inner blue cone, which is the hottest part of the flame and is where combustion occurs, and the outer yellow flame, which is cooler and is responsible for creating a visible flame.
A Bunsen flame is hottest when the air hole is open. When the air hole is open, more oxygen can mix with the gas, resulting in a hotter and more efficient flame. Closing the air hole restricts the amount of oxygen, leading to a cooler flame.
A Bunsen burner flame is at its hottest when it is blue with a sharp inner cone. This is because the blue part of the flame has the most complete combustion of fuel, creating a higher temperature compared to the lower, yellow part of the flame.
The blue flame of the Bunsen burner is when it is hottest. The yellow flame is the safety flame. you should always start the burner on the safety flame which is produced when the holes on its base are closed.
The hottest flame is the blue flame and the coolest flame is yellow.
No, blue is the hottest color on a Bunsen burner flame. The blue color indicates that the gas is burning efficiently and at a high temperature. Yellow in a Bunsen burner flame suggests incomplete combustion and lower temperatures.
The hottest part is where the flame is light blue or blue; which gradually turns to yellow as the flame is cooled by the colder outer air. When the safety flame (yellow) is on, the hottest point is the tip of this flame.
The tip of the inner flame is the hottest.
The blue flame is the hottest... The yellow one is called a safety flame and if you swipe your hand qckly through the safety flame, it won't burn... If you do it quick enough
The inner blue part of the flame is the hottest on a Bunsen burner, as this is where complete combustion occurs due to the optimal air-to-gas ratio.
Near the tip of a blue flame is the hottest.
yes there is a flame at the top of a Bunsen burner. there are three different types light blue blue and yellow
For heating water with a Bunsen burner, you would use a blue flame. This is the hottest part of the Bunsen burner flame and provides the most efficient heat transfer to the water.
As a safety flame, keep it on this if the burner is not in use :)
By increasing the size of the opening at the base, allowing more oxygen to the flame. The hottest flame is the blue flame.