When it is on a blue flame because the blue flame is hotter than the yellow flame due to the mixture of air and gas.
Im Year 7 Guys you should know this!
The hottest part of the flame on a Bunsen burner is at the tip of the inner blue cone. This part of the flame is where combustion is most complete, resulting in the highest temperature.
The blue flame on a Bunsen burner is the hottest because it is a complete combustion of gas with the right mixture of air. The blue color indicates that the flame has enough oxygen for efficient combustion, resulting in higher temperatures compared to a yellow flame.
in bunsen burner complete combustion takes place,it produces blue flame and blue region is the hottest part of a flame.so the whole flame is very hot,either the outermost part of flame.
The two energy regions in a Bunsen burner are the inner blue cone, which is the hottest part of the flame and is where combustion occurs, and the outer yellow flame, which is cooler and is responsible for creating a visible flame.
A Bunsen flame is hottest when the air hole is open. When the air hole is open, more oxygen can mix with the gas, resulting in a hotter and more efficient flame. Closing the air hole restricts the amount of oxygen, leading to a cooler flame.
The hottest flame is the blue flame and the coolest flame is yellow.
No, blue is the hottest color on a Bunsen burner flame. The blue color indicates that the gas is burning efficiently and at a high temperature. Yellow in a Bunsen burner flame suggests incomplete combustion and lower temperatures.
The tip of the inner flame is the hottest.
The inner blue part of the flame is the hottest on a Bunsen burner, as this is where complete combustion occurs due to the optimal air-to-gas ratio.
Near the tip of a blue flame is the hottest.
yes there is a flame at the top of a Bunsen burner. there are three different types light blue blue and yellow
For heating water with a Bunsen burner, you would use a blue flame. This is the hottest part of the Bunsen burner flame and provides the most efficient heat transfer to the water.
The hottest part of the flame on a Bunsen burner is at the tip of the inner blue cone. This part of the flame is where combustion is most complete, resulting in the highest temperature.
The blue flame of the Bunsen burner is when it is hottest. The yellow flame is the safety flame. you should always start the burner on the safety flame which is produced when the holes on its base are closed.
By increasing the size of the opening at the base, allowing more oxygen to the flame. The hottest flame is the blue flame.
The hottest flame on a Bunsen burner is typically the blue cone-shaped flame. You can adjust the air and gas flow to achieve this flame, which is characterized by a steady, roaring noise. To confirm the hottest flame, you could use a thermometer to measure the temperature at the tip of the flame.
The blue flame on a Bunsen burner is the hottest, reaching temperatures exceeding 1,500 degrees Celsius. This flame is produced when gas is mixed with air in the correct ratio for complete combustion.