The Hall coefficient of germanium typically ranges from 0.003 to 0.006 m^3/C. It is a material property that characterizes the ability of a material to conduct current perpendicular to an applied magnetic field.
The Hall coefficient has the same sign as the charge carrier. The charge carrier in a normal electric current, the electron, is negative, and as a result the Hall coefficient is negative.
The value of the coefficient of viscosity of glycerin is approximately 1.5 Pa.s (pascal second) at room temperature. Viscosity measures a fluid's resistance to flow and is influenced by factors such as temperature and pressure.
The coefficient of skewness is a measure of asymmetry in a statistical distribution. It indicates whether the data is skewed to the left, right, or is symmetric. The formula for calculating the coefficient of skewness is [(Mean - Mode) / Standard Deviation]. A positive value indicates right skew, a negative value indicates left skew, and a value of zero indicates a symmetric distribution.
Limiting friction is just the maximum static friction force (if you go over that point static friction becomes kinetic friction).Let f = frictional force,c = coefficient of frictionN = Normal forcefmax = cN = limiting frictionAlthough the term coefficient of limiting friction is not really used, I'd assume it would just be "c" (it's a coefficient after all). So they would be the same.If you meant is coefficient of friction the same as limiting friction, than the answer is no. Coefficient of friction is just the "c" in the equation. Limiting friction however is the product of the coefficient and the normal force.
The coefficient of contraction in an experiment may be greater than the theoretical value due to factors such as flow imperfections, wall roughness, or turbulence in the flow. These factors can lead to additional energy losses and create a greater contraction in the flow compared to the ideal theoretical case. Experimental conditions and inaccuracies in measurements can also contribute to discrepancies between the observed and theoretical values of the coefficient of contraction.
The Hall coefficient has the same sign as the charge carrier. The charge carrier in a normal electric current, the electron, is negative, and as a result the Hall coefficient is negative.
physical significance of hall coefficient
The Hall coefficient of germanium is typically around -0.018 cm³/C. This value indicates the sign and magnitude of the charge carriers in germanium, which are primarily electrons. The negative sign indicates that the charge carriers are negatively charged electrons.
hall coefficient of a lightly doped semiconductor will decrease with increase in temp as hall coefficient is inversely proportional to number density of charge carriers.
-(1.907±0.071)*10^-2 m^3/C
[m^3/C]
The numerical value that comes before the variable or, if none, the coefficient is 1.The numerical value that comes before the variable or, if none, the coefficient is 1.The numerical value that comes before the variable or, if none, the coefficient is 1.The numerical value that comes before the variable or, if none, the coefficient is 1.
A coefficient has a fixed value, unlike a variable in an expression.
The coefficient is the numerical value attached to an unknown or a variable. Thus, the coefficient of 8x is 8.
The average value of the coefficient of velocity for a submerged orifice is typically around 0.97 to 0.99. This value represents the efficiency of the orifice in converting the potential energy of the fluid into kinetic energy.
The value of my GE stock decreased significantly.
A coefficient in front of the absolute value sign means to multiply that coefficient by the absolute value in the problem. For instance 3*ABS(-3) = 3*3 = 9.