LEDs and CFLs use about a quarter of a halogen so the answer is 35-40 watts.
No. Only replace lamps in a fixture that the manufacturer of the fixture recommends. By installing larger than recommended lamps this could create a fire due to the increase of heat generated by the over size lamp.
A desk lamp which takes a regular size bulb. You could easily change it to a higher watt.
Yes, you CAN. The real question is whether or not you should. There is always a fire hazard, especially if the lamp is near drapes, or has a large shade or whatnot on it. If it was me I'd only use a 60 watt bulb in a 60 watt lamp.
A 13-15 watt compact fluorescent bulb (CFL) or a 9-11 watt LED bulb is roughly equivalent to a 60 watt incandescent bulb in terms of light output.
For a 100 watt 12 volt lamp, you should use a wire gauge size of at least 18 AWG to ensure it can handle the current without overheating. It's always best to refer to the manufacturer's recommendations for the specific lamp you are using.
No. Only replace lamps in a fixture that the manufacturer of the fixture recommends. By installing larger than recommended lamps this could create a fire due to the increase of heat generated by the over size lamp.
16 AWG is plenty large enough for a 50 or 100 watt lamp.
Probably a 50 watt halogen
40 watt light bulb
A desk lamp which takes a regular size bulb. You could easily change it to a higher watt.
Yes, the ballast is an intricate part of the fixture that the lamp screws into regardless of what size wattage the lamp is.
To choose a 3-way 150 watt bulb for your lamp, check the lamp's maximum wattage rating, then select a 3-way bulb that does not exceed this wattage. Look for a bulb with the desired brightness levels and ensure it fits the lamp's socket size.
I recommend 120 volt 20 watt halogen if you are on a budget. If you can afford them 120 volt LED is even better and will last for years.
Yes, you CAN. The real question is whether or not you should. There is always a fire hazard, especially if the lamp is near drapes, or has a large shade or whatnot on it. If it was me I'd only use a 60 watt bulb in a 60 watt lamp.
The recommended heat lamp wattage for a reptile terrarium depends on the size and type of reptile. Generally, a 50-100 watt heat lamp is suitable for most reptiles, but it's important to follow specific guidelines for your pet's species.
A 13-15 watt compact fluorescent bulb (CFL) or a 9-11 watt LED bulb is roughly equivalent to a 60 watt incandescent bulb in terms of light output.
For a 100 watt 12 volt lamp, you should use a wire gauge size of at least 18 AWG to ensure it can handle the current without overheating. It's always best to refer to the manufacturer's recommendations for the specific lamp you are using.