0
120 volts is a standard voltage in US for normal house hold electric outlet. , So you can buy from 0 watts to 1000 watts for 120Volts socket . However the bulb you want to buy depend on the Lamp holder , rating of the socket and where the holder is installed, how much light you need etc . Check the max Watts rating on your socket or Lamp and determine the correct Wattage bulb to use. No one can tell you what wattage bulb to use with out looking at your socket or Lamp. The formula for Watts = Volts x Amps Check out the low wattage Compact Fluorescent Light Bulbs which will consume very low engergy and save money in a long run http://www.energystar.gov/index.cfm?c=cfls.pr_cfls
What else can I help you with?
Will a higher wattage hps bulb work in a ballast that came with a lower wattage bulb?
A higher wattage HPS bulb may work with a ballast that is rated for a lower wattage bulb , but may appear to be dim and will not produce the rated light output. It is best to match ballast and bulb accordingly.
Can you put a fluorescent bulb in your floor lamp?
Yes, you can use a fluorescent bulb in a floor lamp as long as the bulb fits the lamp's socket and wattage requirements. Make sure to check the lamp's specifications to ensure compatibility and consider the lighting quality and intensity of the fluorescent bulb for your needs.
What is bulb shape A19?
An A19 shaped globular bulb with an E26 base is the standard bulb that has been used in homes for the last few decades.For a chart see related links below.The A19 refers to the type of and size of the bulb base and socket. There are a myriad of different bulb shapes, but they need an A19 base to fit an A19 socket (standard light socket).
Can you use a hps bulb in a metal halide fixture?
In most cases a cfl bulb can be replaced with an incandescent bulb as long as the base matches. for an example: if a cfl bulb has a GU24 base an incandescent bulb will not work! Also, ensure the wattage of the bulb does not exceed manufacturers rating.
How much volts does a small light bulb need to be powered?
110 volts is what comes out of an average wall socket in America. A 100-watt bulb would be powered by 110 volts. You need to be more specific in your question to get a good answer. Small can't be measured.
Why does the drivers turn signal bulb keep burning out?
The socket that the bulb sits in may be very loose, you may need to remove the bulb and crimp it with a pair of Pliers, or is the socket rusted up, it may need to be cleaned with a bit of sandpaper, check if where the bulb sits at its base, are the contacts touching the base firmly enough. Finally, are you using the correct Voltage and Wattage Bulb ? Cheers
How do you change the bulb in a lava lamp?
Remove the lava lamp by lifting up the glass. It separates from the base because it just sits in it. Unscrew the old bulb and screw another one in. When you remove the bulb you will notice that the bulb and base may not be the size of a standard household bulb. On the inside of the base, or the bottom of the base, there should be information about the type and wattage of the bulb. You need to get the same type of bulb to insure that the bulb base will screw into the socket. The wrong type bulb may not fit in the socket or the bulb may be too large and the top of the lamp will not fit properly on the base. If you get the wrong wattage, the bulb may not be hot enough or to hit to make the bulb function properly.
What are the wattage requirements for outdoor string lights?
The wattage will depend upon the type of bulb and the number of lights on the string. It will tell you on the package what each bulb requires in wattage, so you only need to multiply that by the number of bulbs in the string. so, number of bulbs x wattage requirement for each bulb = wattage requirement.
Will a higher wattage hps bulb work in a ballast that came with a lower wattage bulb?
A higher wattage HPS bulb may work with a ballast that is rated for a lower wattage bulb , but may appear to be dim and will not produce the rated light output. It is best to match ballast and bulb accordingly.
What is the typical wattage of tanning bed bulbs?
The typical wattage of a tanning bed bulb is 100W, but you need to check the size of the bed to make sure.
When you need to use metal halide conversion bulb?
When you want to use a MH bulb in an HPS ballast you must use a conversion bulb. It must be the same wattage as the HPS bulb
What type of light bulb do I need for my fixture?
You need to use the appropriate wattage and type of light bulb recommended for your fixture. Check the fixture's label or manual for the specific requirements.
How do you wire a high watt light to a battery?
Need more information. Wattage of bulb, voltage of bulb, voltage of battery and wire size of the circuit.
Can you put a fluorescent bulb in your floor lamp?
Yes, you can use a fluorescent bulb in a floor lamp as long as the bulb fits the lamp's socket and wattage requirements. Make sure to check the lamp's specifications to ensure compatibility and consider the lighting quality and intensity of the fluorescent bulb for your needs.
How can I purchase a light bulb?
You can purchase a light bulb at hardware stores, home improvement stores, or online retailers. Look for the type and wattage of the bulb you need, and make sure it is compatible with your fixture.
How do you replace Volvo v70 license plate bulb socket?
You need a torx screwdriver....
What is bulb shape A19?
An A19 shaped globular bulb with an E26 base is the standard bulb that has been used in homes for the last few decades.For a chart see related links below.The A19 refers to the type of and size of the bulb base and socket. There are a myriad of different bulb shapes, but they need an A19 base to fit an A19 socket (standard light socket).
