It could be a bad fuse, compressor, or condenser. To diagnose the problem if it is not a bad fuse will require a trip to the shop. How about at any other fan speeds?
You use the coarse adjustment first.
The knob may break.
Nothing will happen because the coarse adjustment knob controls the position of the stage of the microscope, which is used to focus the specimen. This adjustment is independent of the choice of objective lens.
Turning the coarse objective knob downward can cause the objective lens to come in contact with the slide, potentially damaging both the lens and the slide. It is best to always start with the coarse knob in the upward position to prevent any accidental collisions.
To turn off a Bunsen burner, first close the air hole at the base of the burner by turning the metal collar clockwise until it's fully closed. Then turn the gas knob on the burner clockwise until it stops to shut off the gas supply. Let the burner cool down before handling it.
You would use the coarse focus knob to focus on low power. Turn the coarse focus knob clockwise to bring the specimen into view and then fine-tune using the fine focus knob.
The watch can be set by turning the small knob on the side of the watch. Turn the knob to the left to advance the time setting. Turn the knob to the right to turn time backwards.
if the knob used to turn you headlights on is pulled to turn them on, try turning the knob counter-clock-wise and that should turn the gauge lights on and if you keep turning it it will turn the dome light on too.
Turn the lights on, all the way to the right and Pull the knob.
As you turn the fine adjustment knob backward after focusing on the top of the specimen, the depth of focus increases. This is because moving the fine adjustment knob backward moves the specimen away from the objective lens, which increases the distance between the specimen and the lens, resulting in a larger depth of focus.
You use the coarse adjustment first.
To adjust the temperature of the water in the shower, you can turn the shower knob to the left for hotter water and to the right for colder water.
It is the first knob you should turn to bring the object into rough focus, before tinkering with the finer tuning knobs.
When turning headlights on, pull out on headlight switch knob.
All that info can be found in the owners manual.
You click on the knob and you turn the mouse to turn the knob (roate it) duhhh!
The purpose of the lamp knob is to control the brightness of the light emitted by the lamp. It functions by adjusting the flow of electricity to the light bulb, which in turn regulates the amount of light produced. Turning the knob clockwise increases the brightness, while turning it counterclockwise decreases the brightness.