answersLogoWhite

0

When filling the holes in a cinder block, the side with the larger open face is typically facing upward. This allows for easier access to fill the holes with concrete, mortar, or other filler material.

User Avatar

AnswerBot

1y ago

What else can I help you with?

Related Questions

What is Welsh plug?

a welsh plug is a plug in the side of the block and the heads. these fill the holes left after casting.they actually allow the sand to be removed that is used during casting so as you have a hollow block which allows for the water jackets. in the USA these welsh plugs are called freeze plugs. they really do not stop the coolant from damaging the block if coolant freezes they are specifically to block the casting holes


Is there a top and bottom to a cinder block?

Yes, a cinder block typically has a top and bottom. The top side may have a smoother finish, while the bottom is often designed with a more rugged surface to provide stability when stacked. Additionally, many cinder blocks have a specific orientation for proper alignment and strength in construction applications.


What side is up when installing head gasket?

It will be the only side all the holes line up with the holes on the block. Check it out, you'll see what I mean.


Where is the power steering fill tank on a 1978 Chevy pickup?

The fill tank is part of the pully system right behind the fan-should be lower right side if you are facing the block. The fill tank is part of the pully system right behind the fan-should be lower right side if you are facing the block.


What does gout feel like?

Gout feels like someone dropped a cinder block on your toe, and then they decided to stand on the cinder block that's on top of your toe until the attack goes away.


What is a steep side?

A volcanic cinder cone.


Where is the engine block heater on a 1998 ford f-150?

It should be on the left or right side of the engine in one of the freezeout plug holes


You have 390 ford every gasket you tryed blocks off the water inlet on the front of the block which the block has and the gasket do not provide for what gives?

The circulation of coolant flows from the water pump thru each side of the block towards the rear of block then up into the rear of the heads, then forward thru the heads and up into the intake manifold and out the thermostat opening. The holes in front are blocked to force the coolant out the holes in back of the block into heads.


Is it illegal to fill your mailbox with concrete?

That is kind of a stupid question considering the fact that it is illegal to change the position of the thing on the side, that it is illegal to block your mailbox from opening, and that it is illegal to fill your mailbox with a substance that is irremovable


Will a 1975 chev intake fit a 1995 350 block?

Yes it will fit, but you will have to modify the 2 center bolt holes on each side (4 total)


Which software open the block side?

now this action voip side is block in u.a.e which software open the block side


What side of the thermostat goes toward the engin block. The flat side or the extended side?

The extended side goes in the block.