0
What else can I help you with?
Why must you always return to the low power objective before you put the microscope away?
The higher power objectives are longer and can result in scratching the lens the next time someone uses the microscope. It also encourages the user to remove any slides that may have been left which they otherwise would have missed.
When switching from the low-power objective to the high-power objective should you open or close the diaphragm Explain your answer?
When working with a microscope you should always take procauctions but one question I am asked a lot is When working with a microscope do you open or close the diaphram when working with the medium- and high-power objective nobs? The answer is you keep it open if you don't you won't be abler to see any thing.
How do you calculate the resolution on a light microscope?
Multiply the magnification of the ocular and objective lenses. For an example, an ocular lense with mag 10X and an objective lense with mag 40X would result in a total magnification of 400X.
What is the function of the lenses on a light microscope?
The lenses on a light microscope are used to magnify the specimen being observed. The objective lens magnifies the image, and the eyepiece further magnifies the image for viewing. Together, these lenses allow for detailed examination of small objects or organisms.
Why should you never turn the coarse objective knob downward?
Turning the coarse objective knob downward can cause the objective lens to come in contact with the slide, potentially damaging both the lens and the slide. It is best to always start with the coarse knob in the upward position to prevent any accidental collisions.
When you use a microscope why do you have to put the smallest lens back into place before putting the microscope away?
Putting the smallest lens back into place before putting the microscope away helps protect the lens from damage or scratches. It also ensures that the microscope is properly assembled and ready for use the next time it is needed.
What should you always remember when handling microscope slides?
Do not allow the high power objective to tough the lenses
Which objective is always used to first locate an object on a microscope and explain why?
The low-power objective lens (usually 4x) is always used first to locate an object on a microscope. This objective lens provides a wider field of view and a lower magnification, making it easier to find and center the specimen before moving to higher magnifications.
What is a scanning objective?
What is the function of the scanning objective on the microscope? What is the function of the scanning objective on the microscope? What is the function of the scanning objective on the microscope?
Why must you always return to the low power objective before you put the microscope away?
The higher power objectives are longer and can result in scratching the lens the next time someone uses the microscope. It also encourages the user to remove any slides that may have been left which they otherwise would have missed.
When viewing a specimen under the microscope you should always start with what?
When viewing a specimen under the microscope, you should always start with the lowest magnification objective lens. This allows you to locate and focus on the specimen before moving to higher magnifications for a closer look.
What objective do you use to see more detail on a microscope?
To see more detail on a microscope, you would typically start with a low-power objective (such as 4x or 10x) to locate the object, then switch to a high-power objective (such as 40x or 100x) for a closer, more detailed view. Adjusting the focus and lighting can also help in visualizing finer details. Remember to always handle microscope objectives carefully to avoid damage.
When switching from the low-power objective to the high-power objective should you open or close the diaphragm Explain your answer?
When working with a microscope you should always take procauctions but one question I am asked a lot is When working with a microscope do you open or close the diaphram when working with the medium- and high-power objective nobs? The answer is you keep it open if you don't you won't be abler to see any thing.
State two rules you should remember when using a microscope?
When using a microscope, always start with the lowest magnification objective and gradually increase the magnification to avoid damaging the slides. Additionally, remember to always use both hands when handling the microscope to ensure stability and prevent accidents.
Why do you think a microscope always must be stored with the low power objective in place over the stage?
Storing a microscope with the low power objective in place helps to protect the more delicate high power objectives from damage. The low power objective serves as a barrier, preventing the higher power objectives from being accidentally touched or bumped during storage, which can affect their alignment and performance.
How do you calculate the resolution on a light microscope?
Multiply the magnification of the ocular and objective lenses. For an example, an ocular lense with mag 10X and an objective lense with mag 40X would result in a total magnification of 400X.
When viewing a specimen under the microscope you should always start with the?
low power objective lens to locate and focus on the specimen before moving to higher magnifications.
