0
Dear...
As we know that acable carrying alternating current has a alternating magnetic field (Flux)surrounding it. And also we know that when a magnetic flux linked with magnetic material changes, an emf is indused in it which circulates a current in it provided a closed path.
Now in case of three core cable or 3.5 core cables, the net magnetic field prodused by all pahses ( and nutral ) due to currents, sum to zero. But in case of single core cable it has a net flux surrounding it. which if linked with MS ( magnetic Gland palate) will induce eddy currents in it which may result i heating of glands and successivelly failure of insulation of cable due to heat.
So in case of single core cables, aluminum (non magnetic) gland plate is used)...
Hope this will be sufficient to convince you...
anuj rawat
anujgul@Yahoo.com
What else can I help you with?
What is the Difference between 2 plate and 3 plate mold?
A 2-plate mold consists of two plates that separate to release the molded part, whereas a 3-plate mold has an extra runner plate that allows for gating and runner system separation from the molded part. The additional plate in a 3-plate mold enables more complex part design and gating options compared to a 2-plate mold.
IS A single colony 1 organism?
No, it is a population of bacteria that grows from the cell or cells that landed on that spot on the plate.
In the MLB do you have to slide at home plate?
In Major League Baseball, runners are not required to slide at home plate. The rule only states that a player must attempt to avoid a collision if there is a play at the plate. If a player intentionally makes contact with the catcher, they can be called out for interference.
How do you divide 20holes in a 750mm pcd plate?
circle dia 2110 pcd 1990 holes required 40 how to calculate
What are the three main symbols representing plate interactions?
The three main symbols representing plate interactions are convergent boundaries (symbolized by a "V" or "+"), divergent boundaries (symbolized by a "<" or ">"), and transform boundaries (symbolized by a single line).
Can aluminum be used as a gland plate?
yes,for non Ferrous application and in the places where a single core cable is used. Else it not required to use a Aluminium gland plate
How can you charge a metallic plate?
a metalic sheet can be charge by induction and conduction to keep it on insulated stand
What is a System for fixing cable gland at electrical panel plate?
A system for fixing a cable gland at an electrical panel plate typically involves a gland plate or mounting bracket to secure the cable gland in place. The gland is attached to holes or slots in the plate or bracket, which relieve strain and seal the cables. To firmly tighten the gland, a locking nut is frequently utilized. For effective and safe cable management in electrical panels, EnrgTech provides a range of cable glands and accessories.
Why is a single plate clutch used in trucks while a multi-plate clutch is used in bikes?
Cars use a single plate clutch as there is enough space to use the correct dia plate to create the right amount of torque, while motorbikes use multi-plate clutches because they have limited room and need to create more friction surfaces to produce the required torque.
What is the difference between single plate clutch and multi plate clutch?
"What is the difference between single plate clutch and multi plate clutch?"
How to Tell the difference between E. coli and enterobacter aerogenes?
when you plate E.coli onto a EMB plate the colonies turn shinie metalic green, EMB is selective for gut bacteria and it diferentiates E.coli.
Is front license plate required in Vermont?
In Vermont, a front license plate is not required for most vehicles. The state only issues a single license plate for passenger cars, which is displayed on the rear. However, certain vehicles, like trucks and motorcycles, may have different requirements. Always check with the Vermont Department of Motor Vehicles for the most current regulations.
What type of plate is required for installing a new light fixture in the ceiling?
A junction box cover plate is required for installing a new light fixture in the ceiling.
What are the advantages of a single plate clutch?
single plate cluthch is a devie wchichj can with stand various force acting on abod y whic wi
Cytokinesis in plant cells required the formation of what structure?
Cell plate formation
Are license plate light required on trailers?
yes
When is a forklift name plate required?
when you don't have one.
