Appliances cords are made of stranded wire because of the flexibility of these types of cords.
You would use a set of wire strippers made for stranded wire and proper size. If the strippers are made for stranded and solid make sure you use the size identifications for stranded not solid!
Wire can be fabricated in two different forms. Solid wire refers to a single wire, while stranded wire is a wire which is made up of more than one single solid wire twisted together. A stranded wire is much more flexible, and less subject to breaking from flexing than a stranded wire of the same size.
Wire rope has finer strands and more of them. Because of this, rope is more flexible and stronger. Rope tends to unroll and stranded wire will stay bent.
Stranded wire is the choice as you have tight bends and a short run, solid wire isn't very good in this format.
The ribbed wire on a lamp cord is the neutral wire. On an extension cord there is no rib but the neutral wire is white in colour.
You would use a set of wire strippers made for stranded wire and proper size. If the strippers are made for stranded and solid make sure you use the size identifications for stranded not solid!
Wire can be fabricated in two different forms. Solid wire refers to a single wire, while stranded wire is a wire which is made up of more than one single solid wire twisted together. A stranded wire is much more flexible, and less subject to breaking from flexing than a stranded wire of the same size.
You don't. Do not power a water feature without a grounded cord.
Wire rope has finer strands and more of them. Because of this, rope is more flexible and stronger. Rope tends to unroll and stranded wire will stay bent.
no
Stranded wire is the choice as you have tight bends and a short run, solid wire isn't very good in this format.
The ribbed wire on a lamp cord is the neutral wire. On an extension cord there is no rib but the neutral wire is white in colour.
Overcoat: Individual strands of tin copper stranded together & then covered with a tin coating. Topcoat: Bare (untinned) copper wire, stranded, then coated with pure tin.
Cord
WIRE
Yes as long as you use an approved splice, such as a wire-nut.
Yes, but with a heavier gauge wire <<>> If the cord on an electric heater needs to be lengthened as a perminant feature then the whole cord should be replaced with a new cord of the same type and wire size. What this prevents is aquiring bad splice connections at the point the connection is made. Bad splice connections will create hot spots in the cable. If the lengthening of the cord is just a temporary fix, just use an extension cord. The extension cord should be the same wire size as the heater cord. Keep the extension cord under 20 feet in length.