liquid rushes faster at the bottom hole than tops because pressure in liquids is directly proportional to the height of the liquid.that is the deeper the liquid the higher the pressure
Water will come out of the bottom hole faster than a hole at the top due to the force of gravity acting on the water. The bottom hole allows for a greater pressure difference, resulting in faster flow.
Poking a hole in a can allows air to flow into the can, which helps the liquid flow out smoothly by breaking the vacuum seal. Without the hole, the liquid would flow slower due to the vacuum effect that restricts air entering the can to replace the liquid leaving.
This question does not provide enough information on the relevant parameters to even attempt an answer. One would assume that if the hole is at the bottom of the container (and not on the side at the bottom) and the liquid is coming out of the hole only due to gravity that the the container would remain stationary. If there is internal pressure in the container, then the initial pressure becomes important as does the time since the water began to flow. If the hole is on the side of the container, then friction between the container and the surface it is resting on become significant. If the container is not circular in cross section, then the location of the hole along the side helps determine whether the container moves laterally or spins.
A black hole does not have a "bottom" in the traditional sense. Once an object is past the event horizon (the point of no return), it is inevitably pulled towards the singularity at the center of the black hole.
Tears are the liquid that comes out of the hole in your eye, which is called the tear duct. Tears help keep the eyes moist and protect them from irritants.
Water will come out of the bottom hole faster than a hole at the top due to the force of gravity acting on the water. The bottom hole allows for a greater pressure difference, resulting in faster flow.
Poking a hole in a can allows air to flow into the can, which helps the liquid flow out smoothly by breaking the vacuum seal. Without the hole, the liquid would flow slower due to the vacuum effect that restricts air entering the can to replace the liquid leaving.
because most of the the pressured air rushes out of the hole
Assuming you do not refer to the hole at the top and bottom but are referring to a third hole somewhere above the liquid line then the reason is this; By sucking on the top of the straw which is in a liquid, you create a vacuum above the liquid line which draws the liquid to replace the vacuum. If a hole appears somewhere above the liquid line then air is drawn limiting the vacuum and thus the liquid cannot be drawn through the straw.
because liquid exerts more pressure more at the bottom tan at the top
theres a hole in the bottom of the sea theres a hole in the bottom of the sea theres a hole theres a hole theres a hole in the bottom of the sea
This question does not provide enough information on the relevant parameters to even attempt an answer. One would assume that if the hole is at the bottom of the container (and not on the side at the bottom) and the liquid is coming out of the hole only due to gravity that the the container would remain stationary. If there is internal pressure in the container, then the initial pressure becomes important as does the time since the water began to flow. If the hole is on the side of the container, then friction between the container and the surface it is resting on become significant. If the container is not circular in cross section, then the location of the hole along the side helps determine whether the container moves laterally or spins.
The hole closest to the bottom of the bottle will spurt water the furthest. This is because pressure increases with depth in a liquid, so the water at the bottom of the bottle has the highest pressure and will spurt out with greater force.
No, a black hole is not faster than light.
A is the first two holes on the top covered and the bottom hole covered. B is the first hole on the top and on the bottom. C is the second hole ( not the first hole ) and the bottom hole.
It's not needed actually, it just helps the overall flow. One hole is for getting the liquid out, the other lets air inside the can to help it flow faster.
It breaks a hole and water rushes inand pushing air out forsing it dow.