answersLogoWhite

0

The rivets are heated to red hot so that they are more pliable (softer). When placed in the holes bored for them hydraulic hammers are used on both sides of the rivet to hammer then against the surface they are to hold. When they cool down they contract pulling the surfaces of the metal together even tighter.

What else can I help you with?

Continue Learning about Natural Sciences

What is the metal piece that fasten the handle to the tang?

The metal piece that fastens the handle to the tang is called a rivet. Rivets are permanent mechanical fasteners that hold the handle securely in place on the blade of a knife or tool.


What kind of tool used to place scratches in metal?

A tool commonly used to place scratches in metal is a scribe or a metal engraving tool. These tools typically have sharp tips that can create precise lines or patterns on the surface of the metal.


Are the uses and demand for lead adequately met by the production of your metal?

Yes, the uses and demand for lead are adequately met by the production of this metal. Lead is a widely used material in various industries including construction, automotive, and electronics. There are efficient processes in place for lead extraction and production to meet the global demand.


What kind of element is most stretchable of any element?

Yes, according to Glencoe science gold is the most stretchable of any element on the periodic table of elements. In science the word 'ductile' is usually used in place of stretchable. The ability of a metal to be stretched would be called its ductility. This is in contrast to malleability, the ability of a metal to be hammered into thin layers. Gold is both highly ductile and highly malleable, but the characteristics do not always go together. Lead, for example, is highly malleable but not very ductile.


Who hammered in the golden spike?

The golden spike, which marked the completion of the First Transcontinental Railroad in the United States, was hammered in by Leland Stanford, the president of the Central Pacific Railroad. This historic event took place on May 10, 1869, at Promontory Summit, Utah. The spike was made of gold and symbolized the joining of the Central Pacific and Union Pacific railroads, significantly impacting transportation and commerce in the country.

Related Questions

Why are metal rivets used in construction work red hot when they are hammered into place?

The rivets are heated to red hot so that they are more pliable (softer). When placed in the holes bored for them hydraulic hammers are used on both sides of the rivet to hammer then against the surface they are to hold. When they cool down they contract pulling the surfaces of the metal together even tighter.


Can nickel be hammered into a shape?

yes it can be hammered into place because it is a metal but non-metal can not be hammered into shape.


Can metal be hammered into place?

Softer metals can, harder ones not so much.


What is the metal piece that fasten the handle to the tang?

The metal piece that fastens the handle to the tang is called a rivet. Rivets are permanent mechanical fasteners that hold the handle securely in place on the blade of a knife or tool.


How do you remove a factory door handle on a 1991 Ford Mustang when it is held on with rivets?

Just drill the rivets out and use new rivets to hold the handle in place.


How can you replace the window motor on a 97 Cavalier convertible since it appears that the motor is held in place with rivets?

You will have to drill out the rivets. When reinstalling you can use bolts and nuts if you don't have rivets.


How do you remove altima hood rod holder fasteners?

The hood rod holders are held in place with rivets. You can remove the rivets with a small grinder. When the rivets are removed the fastener will come off.


What is the plastic piece hanging under 2002 Mercury Villager?

You are probably referring to the piece under the front bumper. That is a stone shield. It is held in place by several plastic rivets and metal screws.


What is the difference between nails and bolts?

Nails are sharp pointed and are hammered into wood. Bolts are threaded and are inserted into drilled holes in metal or wood or plastic and a nut is screwed on the threads to hold the bolt in place.


Do all ball joints press out?

No, some are held in with rivets, some are bolted, some are screwed directly into the suspension arm, and some are welded in place and are not removable.No, some are held in with rivets, some are bolted, some are screwed directly into the suspension arm, and some are welded in place and are not removable.


Is malleability a or physical property?

It's a physical property. Consider the metal gold. It is wonderfully malleable. It has been hammered into gold leaf for centuries. The gold leaf is not chemically different from the metal that began the process. No chemical changes take place when it is hammered into those extremely thin bits of foil. The elements molecular composition is not changed by the act of bending, warping, "folding, spindling, or mutilating". Gold (Au) is quite malleable and soft Lead (Pb) is quite malleable and soft Diamonds (C) are not malleable nor soft


Is a malleability a chemical or physical property?

It's a physical property. Consider the metal gold. It is wonderfully malleable. It has been hammered into gold leaf for centuries. The gold leaf is not chemically different from the metal that began the process. No chemical changes take place when it is hammered into those extremely thin bits of foil. The elements molecular composition is not changed by the act of bending, warping, "folding, spindling, or mutilating". Gold (Au) is quite malleable and soft Lead (Pb) is quite malleable and soft Diamonds (C) are not malleable nor soft