0
What else can I help you with?
How will you separate the water and sugar mixture?
You can separate the water and sugar mixture by using a process called evaporation. Simply heat the mixture to boil off the water, leaving the sugar behind. Another method is to use a process called filtration, where you pass the mixture through a filter that traps the sugar while allowing the water to pass through.
How to obtain pure water and ethanol from a mixture of sea water and ethanol?
You would use distillation, in which the ethanol and water will boil at different temperatures.
Will the mixture of sugar in water boil at 100 degree Celsius?
The boiling point of a sugar-water mixture is typically higher than that of pure water, which boils at 100 degrees Celsius. This is due to the colligative properties of solutions, where the presence of solute (sugar) raises the boiling point. Therefore, the mixture will not boil at exactly 100 degrees Celsius; it will require a higher temperature to reach its boiling point. The exact boiling point depends on the concentration of sugar in the water.
How will you separate chalk powder iron fillings and naphthalene?
Use a magnet to remove the iron filings... Warm (do not boil) the remaining mixture to evaporate the naphthalene.
Can electromagnetic waves boil an egg?
Yes indeed, but you better be careful if you do it! You will need to puncture a small (needle size) hole through the shell to allow vapour to escape. And arrange it to keep the egg upright. Otherwise you'll spend 15 minutes cleaning exploded egg of the inside of the microwave.
How can you substitute cocoa for chocolate syrup?
1/2 cup cocoa 1 cup sugar 1 cup water 1 teaspoon vanilla extract 1 dash salt Combine cocoa, sugar, and salt in a saucepan. Add water, and mix until smooth. Bring this mixture to a boil. Allow it to boil for one minute, be careful this does not boil over. Remove from heat, when this cools add the vanilla. Makes 16 ounces, equivalent to a can of chocolate syrup.
When you boil milk you have to be very careful to ensure that it does not boil over and spill on the burner There is no such problem when you boil water Why?
Milk contains proteins, which burn. Water doesn't.
How do you thicken runny shampoo?
boil it, but be careful, it might explode or burn
What does let mixture boil to the soft crack stage mean?
i have no clue
Oo0h does anyone know a good recipe of anything sweet?
yeah you could try this recipe: Dairy scottish table which I found on a site called <a href="http://www.recipesfromhome.co.uk">recipesfromhome.co.uk</a> Ingredients * 170g sweetened condensed milk * 760g of sugar * 50g of butter * 180ml of milk Instructions 1. Put ingredients into a saucepan and bring slowly to the boil. 2. Allow to boil slowly on lowest heat, for about 20 minutes until the colour is a rich golden brown and it is starting to crystalise - stir occassionally and be careful that it doesn't boil over the edge of the pan. 3. Take off the heat and beat with a wooden spoon until mixture begins to solidify around the edges - this can take between 10 - 15 minutes. 5. Pour into a buttered tin and allow to cool (the mixture should be crystallising and setting as it is poured into the buttered tin 6. Allow 24hrs to cool thoroughly and then cut into bars - delicious!
What is the process for substituting agar for gelatin in a recipe?
To substitute agar for gelatin in a recipe, use a 1:1 ratio and follow these steps: Dissolve agar in hot liquid before adding to the recipe. Boil the mixture to activate agar's gelling properties. Allow the mixture to cool and set in the refrigerator.
What is the mixture for paper matche paste?
To make a thin, slightly runny paste for use in papier mache, boil 5 cups of water in a saucepan. In a bowl, mix 1/4 cup of sieved flour with a cup of cold water. Mix to a smooth consistency (a bit like making custard). When completely free of lumps, add the mixture to the water in the saucepan. Gently boil, stirring constantly for two or three minutes until the mixture thickens. Allow to cool before using.
What is the process used to separate the parts of a mixture?
you have to boil it and separate it there you go it'''s separated
What is a sentence using the word lance?
Careful with that lance, Eugene. Please lance this boil, doctor.
What is a suitable method for separating salt from seawater?
Allow the water to evaporate, leaving behind the salt would be effective for separating salt and water in a mixture.
How do you get pour water from a mixture of sand an sea water?
If you have a cooker with cap, continuously boil that mixture and collect the water drop in the cap (which from the water's evaporation) until the mixture is only solid.
How will you separate the water and sugar mixture?
You can separate the water and sugar mixture by using a process called evaporation. Simply heat the mixture to boil off the water, leaving the sugar behind. Another method is to use a process called filtration, where you pass the mixture through a filter that traps the sugar while allowing the water to pass through.
