Because if you use the coarse adjustment under high power, there is a greater risk that you will crack the slide on the microscope and damage it. The fine adjustment only moves the objective lense small amounts and very slowly, so there is no chance that you will damage the slide.
Nothing will happen because the coarse adjustment knob controls the position of the stage of the microscope, which is used to focus the specimen. This adjustment is independent of the choice of objective lens.
The coarse adjustment knob on a microscope should never be used with the high-power objective lens. This can cause damage to both the lens and the slide being viewed. Instead, it is best used with the low-power or scanning objective lens for initial focusing.
First of all, one should never call it high power, it is morecommonly called the "high objective", yet that is not what this question is asking. To answer the question: You use the fine adjustment knob. This knob should be located near the coarse adjustment knob, on the opposite side of the microscope (at the same height as the coarse adjustment knob), or even as a separate knob protruding from the coarse adjustment knob. The fine adjustment knob is smaller in size. You should never, ever use the coarse adjustment knob under the high objective, you could scratch the microscope slide, cover slip, high objective lens, or in a worst case scenario break the high objective lens.
The depth of field is so small that a very small vertical travel could shift the focus from the top of the specimen to the bottom. A very fine adjustment must be used, which is why the coarse adjustment screw is implemented.
The coarse adjustment knob controls the stage's vertical position in relation to the objective lenses. If improperly used under high power, it can damage the objective lens or the slide due to the rapid movement.
The stage adjustment knob is used to move the stage horizontally or vertically to position the specimen under the objective lens for viewing. It helps in focusing the specimen and adjusting its position on the microscope slide.
Nothing will happen because the coarse adjustment knob controls the position of the stage of the microscope, which is used to focus the specimen. This adjustment is independent of the choice of objective lens.
For low power you can use the coarse adjustment and fine adjustment for high power you should only use the fine adjustment because on high power, the objective lens is too close to the slide and using the coarse adjustment may scratch the objective lens.
The course-adjustment knob moves the stage up and down quickly, and using it with a high-power objective can potentially damage the objective or slide due to a rapid change in focus. It is best to use the fine-adjustment knob when using a high-power lens for precise focusing.
use the fine adjustment knob to get a better view of what you are looking at.For low power you can use the coarse adjustment and fine adjustmentfor high power you should only use the fine adjustment because on high power, the objective lens is too close to the slide and using the coarse adjustment may scratch the objective lens.
use the fine adjustment knob to get a better view of what you are looking at.For low power you can use the coarse adjustment and fine adjustmentfor high power you should only use the fine adjustment because on high power, the objective lens is too close to the slide and using the coarse adjustment may scratch the objective lens.
The coarse focus knob should be used with the low power objective but not with the high power objective. The point of using the coarse focus knob is to bring the specimen into general focus before fine-tuning with the high power objective, which requires more precise adjustments.
The fine adjustment knob should be used with high power magnification because it allows for smaller, more precise movements of the objective lens. This helps to prevent damage to the slide and objective lens, as well as minimize the risk of crashing the objective lens into the slide.
The coarse adjustment knob on a microscope should never be used with the high-power objective lens. This can cause damage to both the lens and the slide being viewed. Instead, it is best used with the low-power or scanning objective lens for initial focusing.
First of all, one should never call it high power, it is morecommonly called the "high objective", yet that is not what this question is asking. To answer the question: You use the fine adjustment knob. This knob should be located near the coarse adjustment knob, on the opposite side of the microscope (at the same height as the coarse adjustment knob), or even as a separate knob protruding from the coarse adjustment knob. The fine adjustment knob is smaller in size. You should never, ever use the coarse adjustment knob under the high objective, you could scratch the microscope slide, cover slip, high objective lens, or in a worst case scenario break the high objective lens.
The fine adjustment knob should be used only with the high-power objective (HPO) because it allows for precise focusing at high magnifications. Using the fine adjustment knob with lower-power objectives can result in the objective lens hitting the slide, potentially damaging both the lens and the slide.
Using the course adjustment knob on high power can cause the microscope to move too quickly, potentially damaging the specimen or the objective lens. It is better to use the fine adjustment knob on high power for precise focusing.