answersLogoWhite

0

Refrigerant is compressed to a high pressure and temperature to facilitate efficient heat transfer during the refrigeration cycle. When the refrigerant is compressed, its pressure and temperature rise, allowing it to release heat effectively when it passes through the condenser. This process is essential for maintaining the cooling effect in refrigeration and air conditioning systems, as it enables the refrigerant to absorb heat from the environment when it evaporates in the evaporator coil. High-pressure refrigerant also ensures better flow and circulation through the system.

User Avatar

AnswerBot

1w ago

What else can I help you with?

Continue Learning about Natural Sciences

Does refrigerant enter the compressor as a low temperature low pressure gas?

Yes. The basic components of the refrigeration system are the refrigerant, compressor, condenser and receiver, expansion device and the evaporator. One cycle: Refrigerant travels to Compressor (A) to Condenser (B) to Expansion device (C) to evaporator (D). The refrigerant gas at low pressure and temperature is drawn into the compressor. The gas is compressed to a higher pressure, which causes an increase in the temperature. The refrigerant gas at a high pressure and temperature passes to the condenser (point B), where it is cooled (the refrigerant gives up its latent heat) and then condenses to a liquid. The high pressure, low temperature liquid is collected in the receiver. The high pressure liquid is routed through an expansion valve (point C), where it undergoes an abrupt reduction in pressure. That pressure reduction causes part of the liquid to immediately vaporize or flash. The vapor and remaining liquid are cooled to the saturation temperature (boiling point) of the liquid at the reduced pressure. At this point most of the refrigerant is a liquid. The boiling point of the liquid is low, due to the low pressure. When the liquid refrigerant enters the evaporator (point D), it absorbs heat from the process and boils. The refrigerant gas is now at low pressure and temperature, and enters the suction side of the compressor, completing the cycle.


How does air get compressed. and what does that have to do with weather?

Air gets compressed through processes such as changes in pressure or temperature. When air is compressed, it becomes denser and increases in temperature. This process can affect weather by leading to the formation of high-pressure systems, which are associated with fair weather conditions.


Is refrigerant leaving a compressor in a cars air conditioning system high pressure vapor high pressure liquid or low pressure vapor?

Refrigerant leaving a compressor in a car's air conditioning system is a high pressure, high temperature vapor. This vapor carries heat energy away from the evaporator coil inside the car, allowing the refrigerant to absorb heat from the cabin air and cool it down before circulating it back.


Why do clouds disappear with high air pressure?

In a high pressure system air sinks and is compressed. As the air is compressed it heats up, which can cause clouds to evaporate.


How is temperature affected if there is a high pressure in the atmosphere?

High pressure = High temperature

Related Questions

What role does a compessor play in a refrigeration system?

In vapour compressor refrigeration system the low pressure and temperature vapour refrigerant from evaporator is compressed. where it is compressed to a high pressure and temperature. From compressor refrigerant goes to condenser where where it changes the phase. from condenser refrigerant goes to evaporator through expansion device.


How do you change high temperature refrigerant and high pressure refrigerant in to low temperature refrigerant and low pressure refrigerant?

You cool it and run it through a metering devise.


Does refrigerant exit the compressor as a high temperature high pressure liquid?

No , a high temperature high pressure ( gas )


Why is the discharge line hotter than the condensing refrigerant?

The discharge line is hotter than the condensing refrigerant because it is where the high-pressure, high-temperature refrigerant vapor exits the compressor after being compressed. The condensing refrigerant, on the other hand, is in the process of releasing heat to the surrounding environment in the condenser, leading to a lower temperature.


What is a brief description of the basic refrigeration cycle?

Starting at the compressor;Low pressure vapor refrigerant is compressed and discharged out of the compressor.The refrigerant at this point is a high temperature, high pressure, superheated vapor.The high pressure refrigerant flows to the condenser by way of the "Discharge Line".The condenser changes the high pressure refrigerant from a high temperature vapor to a low temperature liquid and leaves through the "Liquid Line".The high pressure refrigerant then flows through a filter dryer to the Thermal Expansion valve or TXV.The TXV meters the correct amount of liquid refrigerant into the evaporator.As the TXV meters the refrigerant, the high pressure liquid changes to a low pressure, low temperature, saturated vapor.This saturated vapor enters the evaporator and is changed to a low pressure dry vapor.The low pressure dry vapor is then returned to the compressor in the "Suction line".The cycle then starts over.


What would be the status of refrigerant at discharge line of Compressor?

At the discharge line of a compressor, the refrigerant is typically in a high-pressure, gaseous state. It has been compressed, increasing its temperature and pressure, and is ready to be directed to the condenser. The refrigerant's high energy content at this stage facilitates the heat transfer process as it moves through the refrigeration cycle.


Examples of air being compressed?

In a bicycle pump, air is compressed when the handle is pumped, increasing the pressure inside the tire. Air is compressed in a scuba diving tank when it is filled with high-pressure air from a compressor. In a refrigerator or air conditioning system, a compressor compresses the refrigerant gas to increase its pressure and temperature.


What does the condenser do in a refrigeration or air conditioning system?

It passes heat out of the high pressure high temp vaporized refrigerant so the it becomes a high pressure lower temperature liquid.It passes heat out of the high pressure high temp vaporized refrigerant so the it becomes a high pressure lower temperature liquid.


Does refrigerant enter the compressor as a low temperature low pressure gas?

Yes. The basic components of the refrigeration system are the refrigerant, compressor, condenser and receiver, expansion device and the evaporator. One cycle: Refrigerant travels to Compressor (A) to Condenser (B) to Expansion device (C) to evaporator (D). The refrigerant gas at low pressure and temperature is drawn into the compressor. The gas is compressed to a higher pressure, which causes an increase in the temperature. The refrigerant gas at a high pressure and temperature passes to the condenser (point B), where it is cooled (the refrigerant gives up its latent heat) and then condenses to a liquid. The high pressure, low temperature liquid is collected in the receiver. The high pressure liquid is routed through an expansion valve (point C), where it undergoes an abrupt reduction in pressure. That pressure reduction causes part of the liquid to immediately vaporize or flash. The vapor and remaining liquid are cooled to the saturation temperature (boiling point) of the liquid at the reduced pressure. At this point most of the refrigerant is a liquid. The boiling point of the liquid is low, due to the low pressure. When the liquid refrigerant enters the evaporator (point D), it absorbs heat from the process and boils. The refrigerant gas is now at low pressure and temperature, and enters the suction side of the compressor, completing the cycle.


What are the steps in the vapor compression process?

The vapor compression process involves four main steps: compression, condensation, expansion, and evaporation. In compression, the refrigerant gas is compressed to increase its pressure and temperature. This high-pressure gas then flows to the condenser where it releases heat and changes into a high-pressure liquid. The liquid refrigerant then goes through an expansion valve, which reduces its pressure and temperature before entering the evaporator. In the evaporator, the refrigerant absorbs heat from the surroundings and changes back into a low-pressure gas, thus completing the cycle.


Can nitrogen be compressed?

Yes, nitrogen can be compressed under high pressure. When compressed, nitrogen gas can be stored in cylinders or tanks for various industrial applications such as in manufacturing processes or for use as a refrigerant.


How does air get compressed. and what does that have to do with weather?

Air gets compressed through processes such as changes in pressure or temperature. When air is compressed, it becomes denser and increases in temperature. This process can affect weather by leading to the formation of high-pressure systems, which are associated with fair weather conditions.