0
What else can I help you with?
When using a glass graduated cylinder partially filled with water always read the mark closest to the bottom of the meniscus true or false?
True
Why does the the meniscus in a graduated cylinder filled with water curve downward?
The meniscus in a graduated cylinder curves downward due to adhesive forces between the water molecules and the glass surface of the cylinder. This causes the water molecules at the edge of the liquid to be attracted to the glass and form a concave meniscus shape.
Which of the following is important to do in order to get a accurate liquid volume measurment?
If using a graduated cylinder, take into consideration the meniscus, which presents itself as a concave depression on the surface of the liquid in a cylindrical vessel or a convex bulge if such a container is filled to the brim. The height of the meniscus should be divided in half. If you don't have a graduated cylinder, utilize the formula pi times radius squared times the height (don't forget to adjust for the meniscus) of the liquid in a cylinder.
Why is water meniscus convex when the container is fully filled?
The meniscus of water is convex when the container is fully filled because of the adhesive forces between the water molecules and the container material overpowering the cohesive forces between the water molecules. This causes the water to climb up the container walls, creating a convex shape.
What is mucoid complete tear posterior horn medial meniscus?
A mucoid complete tear of the posterior horn of the medial meniscus refers to a tear that involves the innermost part of the meniscus and is filled with thickened, gelatinous material. This type of tear can impact the stability and function of the knee joint, leading to symptoms like pain, swelling, and difficulty with range of motion. Treatment may involve rest, physical therapy, or in severe cases, surgery to repair or remove the damaged meniscus.
How do you measure the volume of liqiud?
When a liquid is filled in a cylinder, the liquids usually form a bubble called meniscus. Then you measure the lowest point of the meniscus and record the measurement.
When using a glass graduated cylinder partially filled with water always read the mark closest to the bottom of the meniscus true or false?
True
Why does the the meniscus in a graduated cylinder filled with water curve downward?
The meniscus in a graduated cylinder curves downward due to adhesive forces between the water molecules and the glass surface of the cylinder. This causes the water molecules at the edge of the liquid to be attracted to the glass and form a concave meniscus shape.
How do you read a graduated cylinder while using the meniscus?
The most accurate way to read a graduated cylinder is to place it on a flat surface. Bend down so you are eye level with the Meniscus Line, the line that is formed by the border between the unfilled portion of the cylinder and the top of the liquid. The very lowest part of this line is where you read the measurement. The markings are in whole numbers, 1, 2, 3, etc., with 10 lines between each number.
Which of the following is important to do in order to get a accurate liquid volume measurment?
If using a graduated cylinder, take into consideration the meniscus, which presents itself as a concave depression on the surface of the liquid in a cylindrical vessel or a convex bulge if such a container is filled to the brim. The height of the meniscus should be divided in half. If you don't have a graduated cylinder, utilize the formula pi times radius squared times the height (don't forget to adjust for the meniscus) of the liquid in a cylinder.
How do you put gas into a gas cylinder?
The gas in the liquified state under pressure and it can be filled inside the cylinder. Then it takes the entire available place in side the cylinder. This way gas filled in side the cylinder.
Why does an empty cylinder weigh less than a filled one?
An empty cylinder weighs less because it contains only the weight of the cylinder itself, whereas a filled cylinder contains the weight of both the cylinder and the substance inside it. The substance inside adds to the total weight of the filled cylinder.
How is gas filled in cylinders?
The gas is liquified under pressure and it it takes the entire avalaible place inside the cylinder. thus gas is filled in a cylinder
Which is heavier a full argon cylinder or an empty?
A full cylinder is heavier than empty. The cylinder is filled by weight.
Why does an empty cooking cylinder weighs less compared to a filled cylinder?
What ever was in the cylinder had weight of its' own. When the cylinder was emptied, only the weight of the cylinder was left.
How many ballon are filled with one cylinder by a balloon seller?
The number of balloons that can be filled from one cylinder depends on the size of the cylinder and the size of the balloons. Typically, a small cylinder can fill around 30-50 balloons, while a larger cylinder can fill over 100 balloons.
What are the properties of a cylinder filled with water?
A cylinder filled with water has properties such as volume, surface area, and weight. The volume of water in the cylinder is determined by its height and radius. The surface area of the cylinder is the total area of its curved surface and two circular bases. The weight of the water in the cylinder is influenced by its volume and density.
