answersLogoWhite

0

check the fuel pump and sending unit in the fuel tank

User Avatar

Wiki User

19y ago

What else can I help you with?

Continue Learning about Natural Sciences

Head light switch 93 topaz?

The headlight switch on a 1993 Mercury Topaz is typically located on the dashboard to the left of the steering wheel. It allows you to turn the headlights on and off, as well as control other exterior lights such as the parking lights and fog lights. If you are experiencing issues with your headlights, it is recommended to check the fuse, bulbs, and wiring before replacing the headlight switch.


What causes my temperature gauge not to work after i replaced the thermostat in my 94 mercury topaz?

There are a few possible reasons your temperature gauge may not be working after replacing the thermostat in your Mercury Topaz. It could be due to a faulty temperature sensor, a wiring issue, or a malfunctioning instrument cluster. I recommend checking these components for any issues and ensuring they are functioning properly.


Does a 1993 Mercury Topaz have a relay switch for the air conditioner and heater?

Yes, the 1993 Mercury Topaz is equipped with a blower motor relay that controls the operation of the air conditioner and heater. The relay is typically located in the fuse box under the hood of the vehicle. If you are experiencing issues with your air conditioner or heater not working, the relay may be a possible culprit to check.


How can you fix the horn on a 1989 Mercury Topaz?

To fix the horn on a 1989 Mercury Topaz, first check the fuse and relay related to the horn in the fuse box. If they are not the issue, the horn itself may need to be replaced. You can access the horn by removing the front bumper or wheel well liner to reach it.


What would make a bubbling noise on a Mercury Topaz 1990 when accelerating?

A bubbling noise when accelerating on a Mercury Topaz 1990 could indicate a problem with the cooling system, such as air bubbles in the coolant or a leak. It is recommended to check the coolant level, look for any visible leaks, and consider bleeding the cooling system to remove air pockets. If the issue persists, it's best to have a mechanic inspect the vehicle.

Related Questions

Causes of battery amp warning light on mercury topaz?

Most likely the alt. not charging. Check it with a volt meter on the battery while the engine is running. Should read 14 or so volts.


Location of oil pressure switch 2.0 l engine for 1994 Mercury Topaz?

Should be around the oil filter, check the manual if not there.


What would cause the serpentine to not turn on a 1994 Mercury Topaz if all pulleys spin freely when the car is not running?

check to make sure the belt tensioner is functional if not it needs to be replaced


Where is the fuel pump fuse for 94 mercury topaz?

Check all the fuses, if all are good, check the shut off relay.


1994 Mercury Topaz stalls out while driving and will only restart after waiting awhile?

check your crank sensor


Why ford mercury topaz turns over but wont start and has no spark?

What year? check the ignition module. see manual


Slight vibration and roaring sound above 40 mph in your 92 Mercury Topaz Where do you start?

check front axle bearings.


Is 300 a good price for a mercury topaz?

If you are paying $ 300 for the car, then you just might have to put a thousand or more in for repairs. Check it out.


Mercury Topaz 93 park for last four week Crank but not start you already try to boost but fail?

Check for fuel and spark.


Mercury Topaz stalls when engine is cold?

Check the choke first to insure that it is working properly. Next check the computer codes for any possible issues that may be shown.


Check engine light 1994 Mercury Topaz?

Check engine light? You have to plug the computer in to read the faults. If you do not have one, then most good service shops have, and for a small fee will help you.


Why won't my 1993 Mercury Topaz start despite new battery and old but good alternator?

If you mean will crank, but no fire, then check for spark and fuel. If you mean will not crank, then check the wiring and the starter.