0
What else can I help you with?
There is a problem with this website's security certificate?
I use Vista Ultimate and IE 7 but I found that in my case this problem was caused by Kaspersky Internet Security Suite 7.0.1.325. Right Click on the Kaspersky Icon next to the Clock - Select Settings - Click Traffic Monitoring - Then Select "Do Not check Encrypted Connections" listed under Encrypted connections. I believe some people are having similar problems but the cause is Norton 360 and some have found that their time or date is not correct either in the BIOS or Windows.
Pre stressed concrete compared to Post tensioned concrete?
Prestressed concete made using high tensile wires which is stressed (as per the design load) before concreting, and post tensioned concrete made of Strands covered with duct, in this, wires/strnads are stressed after concreting then the ducts are grouted using cement slurry..
How do you go mbbs after BE biomedical engineering?
yes in university of arizona texus america it can be select the biomedical engineer for doing mbbs in 3 years.
What is the pin diagram of ic 74150?
The pin diagram of the 74150 16 to 1 data selector is ...1 - input 72 - input 63 - input 54 - input 45 - input 36 - input 27 - input 18 - input 09 - strobe10 - ouput (inverted)11 - select D (8)12 - GND13 - select C (4)14 - select B (2)15 - select A (1)16 - input 1517 - input 1418 - input 1319 - input 1220 - input 1121 - input 1022 - input 923 - input 824 - Vcc
How do you choose more than 1 option in a drop down box when they are not in sequence?
It depends on the drop-down box. Some are limited to one selection. In that case, it's impossible, no difference if they're next to each other or not (unless you use JS tweaks). If more than one selection is enabled, choose each one of them with the mouse while holding the CTRL button pressed. Another (pure keyboard) option, is to hold the crtl button down, scroll with the arrows and select with the space (all while CTRL is down, of course)
When the active electrode is not in use it should be placed in the?
When the active electrode is not in use, it should be placed in a designated safety holder or electrode stand to prevent accidental contact and ensure it remains sterile. This helps to minimize the risk of electrical shock and maintains the integrity of the electrode for future use. Always ensure the holder is stable and free from contaminants.
What electrode use for root pass?
6010
Can the saturated calomel reference electrode be used in strong alkaline media such as 2-5 N KOH solution?
No, the saturated calomel reference electrode is not suitable for use in strong alkaline solutions like 2-5 N KOH. The high pH environment can damage the electrode and affect its performance. It is better to use a reference electrode designed specifically for use in alkaline media, such as a silver/silver chloride electrode.
What type of electrode use for hard facing?
E8018
Why metals are made of electrical wires?
Because metal is one of the greatest conductors of electricity.
Which electrode is polarisable electrode in Polarography?
The dropping mercury electrode
How do you make a bulb light with a with a fruit?
First, get a zinc electrode and a copper electrode. You can use a zinc coated nail and a penny. Put both of them into the fruit. You might need lots of fruit. Attach them together (in series), copper to zinc, and vice versa. The electrodes of the same fruit can't be wired together. Attach the free ends of the wires to the light, and it should light up!
What is electrode potential-?
Electrode potential is the voltage that an electrode is at. This has to be measured versus a reference electrode
What type of electrodes use in pH meter?
pH meters typically use glass electrodes to measure the pH of a solution. These electrodes are sensitive to changes in hydrogen ion concentration and provide accurate pH readings. Additionally, reference electrodes are used in combination with the glass electrode to ensure reliable and consistent measurements.
What are lithium --ion batteries and how do they work?
Lithium ion batteries use lithium metallic oxide in its positive electrode (cathode) and carbon material in its negative electrode (anode). Lithium ions inside the battery transfer between the positive electrode and the negative electrode during charge or discharge. Ms.Helen Ren
What wires are positive on an ignition module for a 1982 F150?
Chances are there is no polarity. An ignition coil is simply a wound of wires used to generate high voltage. But you may find a marking on it such as a "+" or a red wire wich would indicate the positive electrode.
What level does electrode evolve?
Electrode doesnt evolve. Voltorb evolves into Electrode at level 30 Electrode doesnt evolve. Voltorb evolves into Electrode at level 30
