0
If you are referring to a plastic drop in liner, the answer is "no" it must be removed. The BedRug is designed to attach directly to the sheet metal of the bed/box with hook and loop (velcro) fasteners. If you are referring to a spray in liner, "yes" it can be installed over the top of this with special adhesive promoter which can be purchased through BedRug customer service.
What else can I help you with?
How to install a shower pan liner and mortar correctly?
To install a shower pan liner and mortar correctly, first, ensure the subfloor is clean and level. Next, place the shower pan liner over the subfloor and up the walls, ensuring it overlaps the drain. Secure the liner with nails or adhesive. Then, mix and apply a layer of mortar over the liner, sloping it towards the drain for proper drainage. Allow the mortar to set before tiling the shower floor.
What is the difference between a beaded liner and an overlap liner for above ground swimming pools?
A beaded liner will have a thick bead or lip of vinyl around the top of the liner. This bead will fit into a track which is made to receive the bead at the top edge of your pool. To replace it you simply pull out the old one an insert the new. There is a little more to it, but as far as the bead is concerned that is all you have to do with it. Overlap liners are harder to install because there is no bead so you don't know where the correct height is. You overlap the liner over the top edge of the swimming pool and clamp it in place with a piece of plastic. A beaded liner is harder to measure but easier to install and a over lapping liner is just the opposite because you are constantly adjusting the plastic clamps.
Can you install linoulem over laminate?
No. You have to glue your linoleum on the hard surface, but Laminate is a floating floor and always move.
How to install a mortar bed for a shower pan?
To install a mortar bed for a shower pan, first ensure the subfloor is clean and level. Mix mortar according to manufacturer instructions and spread it evenly on the subfloor. Place a shower pan liner over the mortar and press it into place. Add more mortar on top of the liner and slope it towards the drain. Allow the mortar to set before installing the shower pan on top.
What is the best way to keep my hard drive from over heating?
You can always install a fan in front of your hard drive to help it cool down, or put it in eco-mode.
How hard is it to install the GE Profile Spacemaker PVM1870SMSS?
The GE Profile Spacemaker PVM187OSMSS is easy to install two people can install this over the stove microwave oven the instructions are easy to follow and you just plug it in an get cooking!
Can you install a pool liner over an old one?
Honestly, the best thing to do is call your local pool store and have them send someone to do it. It's fairly tricky to do, and it really easy to tear the liner during install. Also, the temperature outside has to be just right. If it's too cold, the liner will crack and tear very easily. If it's too hot, the liner will over-stretch. You can go to www.backyardescape.com to find a pool store in your area. They seem to be the best place. The site is put together by the biggest pool companies in the country, and all the stores that buy from them are listed, so it seems to be the most comprehensive list I've found yet. Good luck! Maybe this will help, but it is a lot of work and things could go wrong. Installation instructions are available at instheswim.com. These instructions seem to be a bit simplistic, but who am I to criticize. It probably would be good to consult a pool shop professional if you can. When I installed my liner I did not follow these instructions. Anyway, to locate the instructions, go to the main page at intheswim.com. Click on the category
Can you rehang the liner on your above-ground pool if it fell over in the winter?
You can rehang the liner on your above-ground pool if it fell over in the winter but you will need to remove the pool corner caps, the rail, and all of the water. You can then re-stretch the pool liner and refill the pool.
How much pool liner do you allow at top for overlap pools?
That normally depends on where you are getting the liner from, but in most cases, you measure the pool diameter and actual pool wall height. When you order the liner, let the liner manufacturer know the liner is for an above-ground pool with an overlap liner. The liner manufacturer will then make the pool wall enough longer to allow several inches of liner material to fold over the top of the pool wall and anchor it in place with the liner locking strips.
If you have a vinyl liner pool sides are fiberglass in concrete bottom is concrete mixture liner sets on how can you convert it to fiberglass?
The experts at Advanced Pool Coatings have been installing fiberglass coatings over vinyl liner pools for over 30 years. You can read more at: http://www.advancedpoolcoatings.com.
What is an Ocean Liner?
Like the airliner carries passengers to different places; the ocean liner is a ship, that carries passengers to different places, over the ocean.
Should there be some type of foam or underlay over the steel walls before installing the liner in a vinyl liner pool with steel wall construction?
no.
