answersLogoWhite

0

Keep it in a bucket with soap and water so it doesn't dry out. Pre-cut a few lengths at a time so you won't need to mess with it too often.

User Avatar

Wiki User

12y ago

What else can I help you with?

Related Questions

What is weed eater trimmer line made of?

Nylon


What is the purpose of a line trimmer?

A line trimmer, also known as a string trimmer, is used to trim grass or weeds. The piece of equipment also goes by the name of a weed eater, or weed whacker.


How do I open the weed eater head to replace the trimmer line?

To open the weed eater head to replace the trimmer line, first, locate the tabs on the side of the head. Press and hold these tabs while twisting the head counterclockwise to unlock it. Once unlocked, carefully remove the head to access the spool and replace the trimmer line.


What is the best type of weed eater trimmer line to use for cutting through tough vegetation?

The best type of weed eater trimmer line for cutting through tough vegetation is a heavy-duty, twisted or serrated line with a thicker diameter. These types of trimmer lines are more durable and can easily cut through dense and tough vegetation.


How do I restring a Ryobi Expand-It weed eater?

To restring a Ryobi Expand-It weed eater, first remove the spool from the trimmer head. Cut a length of new trimmer line, usually around 10 feet. Insert the line into the spool following the arrows for the correct winding direction. Secure the line in the notches on the spool and reassemble the spool onto the trimmer head.


How do you load weed eater line on a craftsman?

To load weed eater line on a Craftsman trimmer, first, turn off the trimmer and unplug it if it's electric. Remove the spool from the head by pressing the tabs and pulling it out. Cut a length of trimmer line (typically around 10-15 feet), then insert one end into the spool's eyelet and wind the line in the direction indicated by the arrow on the spool. Finally, replace the spool back into the trimmer head and pull the line to ensure it feeds properly.


How can I restring a Ryobi Expand-It weed eater?

To restring a Ryobi Expand-It weed eater, first remove the spool from the trimmer head. Cut a length of new trimmer line, thread it through the eyelet holes on the spool, and wind it evenly in the direction indicated on the spool. Reattach the spool to the trimmer head and trim any excess line.


Can a 115 trimmer line be replaced with another trimmer line of a differen gauge?

Yes it can, but the line does not last as long. My experience has taught me that the smaller the line the shorter the lifespan.


How do you replace a weed eater trimmer line on a sam 210?

If this is in fact an Echo SRM 210, then a manual is linked below.


What is the best type of string to use for a Kobalt weed eater?

The best type of string to use for a Kobalt weed eater is a high-quality, durable trimmer line that is compatible with the specific model of the weed eater.


How do I properly restring a Ryobi weed eater?

To properly restring a Ryobi weed eater, first remove the spool from the trimmer head. Cut a length of new trimmer line, usually around 10 feet. Insert one end of the line into the hole in the spool and wind it in the direction indicated on the spool until it is full. Secure the line in the notches on the spool and reassemble the spool onto the trimmer head. Cut the line to the desired length and you're ready to trim.


How do you replace the weed eater trimmer line on a blade n1e-spk-500?

To replace the trimmer line on the Blade N1E-SPK-500, first, ensure the trimmer is turned off and unplugged. Remove the spool cover by pressing the tabs and take out the old line. Cut a new line to the manufacturer's specified length, then thread it through the spool and wind it tightly in the direction indicated on the spool. Finally, reassemble the spool and cover, ensuring everything is securely in place before using the trimmer.