It s suggested that the screen be eye height when setting down. The thing to remember is the flat screen reflects light more than the CRT TV, don't mount the screen opposite windows or other light sources, tilting might be a help.
4 feet off the ground Or at least above your toes.
Every wall mount is different. You should not unscrew the bolts that connect the TV chassis to the mount until it has been removed from the wall. If it is a large TV (40" +), have someone else help you. Some mounts use a bar system, some use a hook system. If you can find a model and make on the mount, check out the website of the manufacturer for installation instructions.
The ideal is one that's comfortable for you to view, without having to tilt your head up or down to watch. Personally, I'd think between 36" to 48" give or take some and depending on the size of the screen.
Use a professionally made mounting bracket and a very good handyman or carpenter. These things are HEAVY.
It means that the stand can move the TV in any direction except up and down.
4ft from the floor to the bottom of the tv.
The middle of the screen should be just below eye level when you are seated.
4 feet off the ground Or at least above your toes.
To mount your TV, use M8 size bolts.
For a TV mount installation, it is recommended to use M8 size bolts.
For securely installing your television on the wall, you should use a VESA-compliant TV mount hardware. Make sure to check the weight capacity and size compatibility of the mount to ensure a secure installation.
The safety of a ceiling mount is about the same as the safety of a wall mounted television. However, one should always remember that duo to force of gravity a ceiling mount is weaker.
For a TV mount installation, it is recommended to use lag bolts that are at least 2.5 inches in length and have a diameter of 1/4 inch. These bolts should be able to securely hold the weight of the TV and mount on the wall.
There is no doubt that flat screen televisions are extremely popular. This is mainly because flat screen televisions feature outstanding picture quality. In addition, it is possible to easily put them on a TV stand and mount them to your wall.Measure Your TVYou can start by measuring your TV with measuring tape. After you have measured your TV, you can look for areas in your home that offers enough room for your TV. You should also use a stud finder. A stud finder can help you find a stud that allows you to mount your TV on your wall. Without a stud in the wall, you will not be able to mount your television.Take Care of CordsYou should make sure that the spot you pick is relatively close to an outlet. You may need to purchase a cord cover. Cord covers ensure that after you have mounted your TV the cords do not look too cluttered or messy.Attach the Mount to Your TVAfter you have taken care of the cords and after you have picked the right spot for your TV, you need to attach a mount or a TV stand to your TV. Each mount is different. Because of this, it is important for you to read the instructions that are given to you after you purchase the mount. You normally need to purchase screws. In addition, you should have a drill or a screwdriver in order to install the mount to your TV. Many different mounts normally require you to install around two beams to the back of your TV. This allows you to hang your TV to the mount.Attach the Mount to Your WallNow you will need to attach the mount to the area that you picked earlier. However, before you screw the mount to the wall, you should get someone to hold it against the wall. Stand back and make sure that the mount is in the right area and that it looks okay. The mount should be at eye level. Then you will need to mark the perimeters of where the mount will be. You can now screw the mount into the wall. Hang the TV onto the mount. The TV should fit easily due to the beams that you installed earlier.
The one thing that you should do is to make sure that the mount can hold the TV correctly. If not then your TV will be prone to falling when it comes to an earthquake.
High quality HDTVs are usually not hceap. You should look into off brands like Coby. If you don't want it stolen, do not buy name brands. Another option for security is to keep a lock in the mount.
The best TV mount for an 85-inch TV is a full-motion mount that can support the weight and size of the TV. Look for a mount with a high weight capacity, sturdy construction, and adjustable tilt and swivel features for optimal viewing angles. Make sure to follow the manufacturer's guidelines for installation to ensure safety and stability.