I believe it's surround sound, but to be sure call Sherwood and ask them about the 4105.
Regular passive (non-amplified) speakers will need to be connected to a power amp (an old stereo receiver can do this). Connect the line out of the computer to the aux or tape in of the receiver, and then connect speaker cables from the receiver to each of the speakers.
The STR-212 is a stereo receiver made by Sony in the late 80's and early 90's. It is not a home theater receiver, as it has no video switching capability, no digital inputs/outputs and only supports stereo speakers (2 pairs, usually set up in 2 different rooms).
It depends on the speakers. Bose computer speakers are not designed to connect directly to speaker inputs on your receiver, as they have their own amplifier. All Bose home stereo speakers can be connected.
Is it a Bose Acoustimass system? If so, buy at least 90-100 watts per channel receiver. Think if you also need a zone 2 for outdoor speakers, so then you can power both rooms independently. You wont be able to use a Bose Companion computer speaker system with a surround receiver.
For most home theater setups, all you really need is an RCA cable to connect your TV to the stereo receiver.
They're both the same. A "channel" stereo receiver merely accepts a given number of channels (2,4,5, &tc.). A stereo receiver has 2 channels of audio output, left and right. A receiver marked as ___ channel receiver has the corresponding number of channels. For instance a 5 channel stereo receiver can play 5 different channels of audio through 5 speakers. If the receiver has a decimal, such as 5.1 or 7.1, that indicates that it has 5 or 7 channels of regular audio, plus 1 channel for subwoofer, making them 6 and 8 channels, respectively.
Connect a audio cable from the Audio Out connectors on the cable box to the AUX In Audio connectors on the stereo receiver.
The Yamaha R-S700 is their best stereo receiver with Sirius satellite capability. It is not a surround receiver.
One can purchase a Bluetooth stereo receiver at Target, Walmart, and Best Buy. Bluetooth stereo receivers can also be purchased online at Amazon, eBay, and Belkin.
what is the vibe va-405 code for an insignia receiver
Regular passive (non-amplified) speakers will need to be connected to a power amp (an old stereo receiver can do this). Connect the line out of the computer to the aux or tape in of the receiver, and then connect speaker cables from the receiver to each of the speakers.
You can connect a 14 speaker jack to a home tuner stereo receiver using the RCA connector.
A 14 speaker jack can be connected to a stereo tuner music receiver via an RCA connector.
It's a great receiver with a low signal-to-noise ratio.
1996
Yes you can provided that you have a additional sound system like a stereo receiver for the sound, if you a cable box/satellite receiver of and HDTV Receiver with either a HDMI or DVI port, (you'll need a converter cable for HDMI)
Where you can plug it into a stereo receiver. It means auxillary.