The dimmers control the intensity of the lights.
In modern Stage Lighting, the lights are not directly connected to a lighting console. Instead, the console sends out a digital signal to a dimmer rack. The Dimmer rack outputs the power to the lights themselves, multi-cable drop boxes, or raceways. Multicable drop boxes, are extension devices that use a 19 conductor socapex connector to combine 6 power lines into one cable. This multicable is then fed into an enclosure that splits the multicable back into its individual conductors. Once the conductors are seperated, they can be connected to individual outputs. These boxes are highly portable in a lighting rig and connect to a truss or batten with a standard "C" clamp.
Here are some terms: par(like golf)- light gel- color on light gobo- goes on light and projects image board- lighting console dimmer- what actually dims the lights pigtails- plugs the lights in hoist- a bar that raises and lowers the lights cue- a certain change in lights catwalk- a platform above the stage where lights are hung remote focus unit- a handheld device that performs common tasks on the console remotely Hope this helps!!
A dimmer pack is a collection of dimmers used to DIM, or change the intensity of the lights in a theatrical show.Dimmer packs come in many varieties, from budget (anything from £50) right up to the high end stuff (up to about £3000)They are commonly controlled remotely from the lighting control console via either 0-10v analogue, or (more commonly these days) DMX-512.An ideal dimmer changes only the intensity of the light, leaving all other attributes unchanged. Most dimmers lower the voltage to the light, which also causes the light to shift to the warm/red end of the spectrum because the filament cools. Some modern lighting instruments include a dimmer in the instrument (either mechanical or electrical) and do not require a dimmer pack.Most dimmer packs also distort the sinusoidal waveform of the AC voltage and can cause noise and problems if connected to motors. Some special dimmers produce true sine wave output.
Lighting for concerts is divided into two catagories: Conventional and Intelligent. Conventional lights are standard lights that grow brighter and dimmer as more or less electricity is fed to them. Intelligent lights are the cool moving lights that change color and move in different directions. All the lighting is controlled from one console at the back of the audience. The console is usually a WholeHog or a GrandMA or (in older concerts) an ETC board. All the fixtures' positions, colors, patterns (gobos) and intensity are directed to change from a preprogrammed set of instructions from these consoles. Each light is connected to the next light with a cable that carries the instructions by a digital signal known as DMX-512, or simply "DMX." If a concert is different from night to night (like with Phish or Dave Matthews) then the lighting director will cue the show manually. The lighting director has to be intimately familiar with the music in order to keep the cues firing just at the right time. If a show is the same night after night (like Disney On Ice) then the console is connected to a time-code generator that will automatically fire the cues. The lighting director is then free to follow the cues and call followspot orders (which are operated by people).
In all stage lighting, weather it be in theatre or for a concert, DMX is refers to the multiplexed signal carrying protocols sent from a controller to any DMX receiving equipment. In earlier days (before DMX), lighting control was based around AMX (Analog Multiplexed). To control a single channel, two wires were connected from the console to the dimmers. The dimmers interpreted this information based on the voltage coming through the wires, which was generally 0 to +10 volts, where 0 volts indicated fully off, and 10 volts indicated fully on. This system was however not efficient, as many wires were required for use, lots of power was required, and there was a safety risk involved. This is where DMX was invented. DMX stands for Digital Multiplexed. This protocol is normally sent down a 5-pin XLR cable, occasionally a 3-pin (not to be confused with microphone connectors). DMX is far more efficient, as it can cope with sending 512 channels of information through a single cable. The console sends out rapid bursts of information, containing the levels for each one of the 512 channels, at about a few hundred times per second, allowing for smooth control of lighting. Dimmers or other equipment receive the information, and will let out the corresponding voltage for that channel, out of the power socket (in a dimmer) Whereas intelligent lights will interpret the levels, and adjust one of their many parameters. So overall, DMX is the industry standard protocol for lighting, and a single cable can handle 512 channels, if any more are required, your console may have another outlet (unlikely) or you can just use another console, meaning you will end up with two separate DMX 'universes'. a.jaudzems
To effectively use a plug-in lamp dimmer to adjust the brightness of your lighting, simply plug the dimmer into the wall outlet and then plug your lamp into the dimmer. Use the dial or switch on the dimmer to adjust the brightness to your desired level.
In modern Stage Lighting, the lights are not directly connected to a lighting console. Instead, the console sends out a digital signal to a dimmer rack. The Dimmer rack outputs the power to the lights themselves, multi-cable drop boxes, or raceways. Multicable drop boxes, are extension devices that use a 19 conductor socapex connector to combine 6 power lines into one cable. This multicable is then fed into an enclosure that splits the multicable back into its individual conductors. Once the conductors are seperated, they can be connected to individual outputs. These boxes are highly portable in a lighting rig and connect to a truss or batten with a standard "C" clamp.
Yes, you can install a dimmer switch on a 3-way lighting circuit by replacing one of the existing switches with a compatible dimmer switch designed for 3-way circuits.
To find a dimmer and switch combo compatible with your current lighting system, you can consult the manufacturer's specifications of your existing lighting system and look for a dimmer and switch that is designed to work with the same type of lighting technology. You can also seek advice from a professional electrician or visit a home improvement store for assistance in selecting the right dimmer and switch combo for your setup.
No. Intelligent lights (DMX controlled) do not need a dimmer box. They can be dimmed by DMX control. You just need a DMX control console, such as the controllers sold by American DJ under the Elation brand.
Using a LED dimmer switch in a home lighting system can help save energy, extend the lifespan of LED bulbs, create different lighting moods, and reduce eye strain.
Low voltage dimmer switches in a home lighting system offer benefits such as energy savings, extended bulb life, and the ability to create different lighting moods and ambiance.
To install a 3 switch dimmer in your home, you will need to first turn off the power to the circuit at the breaker box. Remove the existing switches and replace them with the 3 switch dimmer. Follow the manufacturer's instructions for wiring the dimmer properly. Once installed, you can use the dimmer to control the lighting levels more effectively by adjusting the dimmer sliders for each switch.
To add a dimmer switch to control the lighting in your room, you will need to first turn off the power to the room at the circuit breaker. Then, remove the existing light switch and replace it with a dimmer switch. Follow the manufacturer's instructions for installation and wiring. Once installed, you can adjust the dimmer switch to control the brightness of the lights in your room.
For optimal performance and compatibility with various types of LED lighting fixtures, the Lutron Caseta Wireless Smart Lighting Dimmer Switch is a recommended choice.
LED dimmer switches offer several benefits in a home lighting system. They allow for customizable lighting levels, which can create different moods and ambiance in a room. Dimming the lights can also save energy and extend the lifespan of LED bulbs. Additionally, dimmer switches provide convenience and flexibility in controlling the brightness of the lights.
Fan dimmer switches offer the benefit of controlling the brightness of the lights in a room, allowing for customizable lighting levels to suit different activities or moods. Additionally, they can help save energy by reducing the amount of electricity used for lighting.