The thermostat is on the top side of the engine. Follow the hose from the radiator to where it goes connects to the engine. The housing may have the coil bolted on to the outside, depending upon the model. On the top side of the housing is an Allen screw, which should help identify it, plus the temperature sensor is on it as well. The housing must be removed to change out the thermostat. The set screw must also be removed during refilling the system to allow air to escape.
install timing belt on 1993 Plymouth sundance
The 1991 2.2 Plymouth Sundance America has a oil capacity of 4.5 Quarts
Under the dash, driver seat side of the parking brake.
Behind the firewall on the driver's side of the dash.. You can access it under the dash in front of the driver...
If the dash light on a 1991 Plymouth Sundance does not work, this may be because it is grounded. Another reason may be busted fuse.
Plymouth Sundance was created in 1987.
The fuel pump is inside the fuel tank on a Sundance.
in the fuse box
It is mounted in the fuel tank.
The engine computer is the regulator.
Follow the upper radiator hose to its end. The thermostat is located right about there.
How do I change th starter on a 1994 Plymouth sundance
Front camber is adjusted at the strut to knuckle bolts.
underneath right side by fuel tank
install timing belt on 1993 Plymouth sundance
The thermostat is located where the upper radiator hose connects to the engine.
That car does not use a maf sensor.