0
Why does the right speaker on your stereo have static but the other one is fine?
Wiki User
∙ 16y ago
There's a couple of things I can think of right away. First is loose wiring or wires touching each other (shorting), the other is that the speaker's blown.
Then if your stereo has rotary speaker select switches or pushbutton switches for input, bass boost, etc., they may be dirty. Try working them back and forth several times to see if the static clears up.
If not, you may just have a blown part in your pre-amp/amplifier which would require repair.
Wiki User
∙ 16y ago
Anonymous
My system was doing the same thing, but it was both speakers intermittently going down in volume and a lot of static. I pulled the speaker wires out of the amp, and then reconnected them. It worked. (so far).
Add your answer:
Earn +20 pts
Can you use the tv as the center channel?
If you're talking about getting true surround sound, then generally no. Some flat screens come with speakers that are connected to the tv with speaker wire specifically so you can disconnect it from the TV and plug it into your surround receiver, but other than that....no. The problem is that in surround sound you have 5 (or more) speakers each getting a specific part of the audio to play. Stuff happening on the right rear of the soundstage in the movie comes out of the right rear speaker etc. The television speaker has no such capability so when you turn it on it's going to play all the sound in stereo. It can be done but it won't sound right.
What can one do with an RCA audio cable?
The purpose of an RCA cable or connector is to carry audio. It has a red connector for the right stereo channel and a white or black connector for the left stereo channel. One example of how an RCA audio cable could be used is to connect a CD player to other stereo equipment.
Can you connect a two-way radio external speaker output to the stereo speakers so that it will override the stereo signal when you get a call?
Yes, absolutely you can. The difficulty is that the controller needed to do the job is not something that can be bought off the shelf. Here is one idea to make the system work: First, take the output from the communications radio and establish the signal characteristics. You may need an attenuator to reduce the voltage of the signal. Once the signal is at the right level, it will need to be connected to an input on the stereo. Additionally, a sensor that will detect an audio signal on the comms radio output or a sensor that detects a valid radio signal on the comms radio is needed. Use the sensor output to trigger a switch from the current input to the comms radio input on the stereo. As an alternative, the same sensor output can be used to switch the speaker signal from the stereo to the comms radio. You will need a separate amplifier to do this as well as a suitable signal switcher to select either of the two speaker signals. The solution is not particularly difficult for an engineer to produce but it is not a straightforward job either.
What is the difference between 5.1 dolby digital and 2.0 dolby digital?
Dolby 5.1 is a multi-channel audio format. Basically meaning, it's surround sound. There is a Left, Centre, Right, Left Surround, Right Surround and LFE (Sub) Speaker. Dolby 2.0 is simply 2 speakers, Left and Right. Similar to the Stereo sound you get from your TV. The Dolby bit means it has been compressed and encoded using Dolby technolgies, normally AC3.
What does panning mean in musical terms?
In a surround sound system, it is where the sound seems to come from, E.G. the left speaker, the right speaker or somewhere in between the two
How do you connect one speaker to the Right and Left outputs of a stereo amplifier?
To connect one speaker to the right and left outputs of a stereo amplifier, split the input into two parts. These should go to the left and right signals. The input of the amps should be a stereo input.
What is mono on a TV?
Mono is a type of sound on a set of speakers. There are two, mono and stereo. Stereo is the opposite of mono, so say a person is speaking on the right side of the screen. In stereo, the speaker's voice comes from the right speaker. In mono, though, the speaker's voice comes out of both speakers. Most people prefer stereo because it makes the experience more realistic.
Where is the fuse or fuses for rear speaker wires of a 2002 suzuki esteem?
there is no fuse for your speakers the speaker wire runs from your stereo you might have a wire lose behind your stereo or may have shorted out some were from the stereo to the speaker or some times you might put some thing in the trunk and disconnect the wire from the speaker and if that just plug right back in to the speaker
What would cause static to come out of the front right radio speaker when the radio is off or on?
your speaker is blowen. it will do that until it is replaced
What kind of receiver will allow you to play a mono hi-fi speaker from the 1950's when present receivers are formatted for stereo?
Any stereo amplifier these days can connect to a speaker from the 1950's. You will just have to connect one side, left or right, to the speaker. You won't get stereo. If your receiver has the option, you should select mono output to combine the signal of both channels. Never connect the left and right speaker leads together to one speaker.
What are the car stereo wiring colors for a 1988 Cadillac Eldorado with Bose?
The car stereo wiring colors for a 1988 Cadillac El Dorado with Bose are gray for right front speaker positive. Light green for right front speaker negative. Dark green for audio rear speaker positive and brown for rear speaker negative.
What are home stereo speaker wire color codes?
red left+ black left - white right + green right -
Where can I view a wiring diagram for a stereo in a 1995 Mitsubishi?
Hi, The Stereo Wire colours are as follows: * Permanent live: red/black * Accessory +12v: blue * Illumination: green/white * Earth: 6mm nut * Antenna trigger: pink * Rear left speaker+ : yellow/blue * Rear left speaker- : grey/blue * Rear right speaker+ : yellow/red * Rear right speaker- : grey/red * Front left speaker+ : white/blue * Front left speaker- : black/blue * Front right speaker+ : white/red * Front right speaker- : black/red
What are the stereo wire colors on an 88 Camry?
The stereo wire colors on a 1988 Toyota Camry are similar to other Toyota models. The radio constant 12v+ wire is blue/yellow, the radio switched 12v+ wire is gray, the ground wire is brown, and the illumination wire is green. The radio power antenna trigger wire is black/red. The left front speaker wire (+) is pink and the left front speaker wire (-) is purple. The right front speaker wire (+) is light green, the right front speaker wire (-) is blue. The rear left speaker wire (+) is black and the rear left speaker wire (-) is yellow. The rear right speaker wire (+) is red and the rear right speaker wire (-) is white.
What is the stereo wiring diagram for a 1992 Camry xle?
Car Radio Constant 12V+ Wire: Blue/Yellow Car Radio Ignition Switched 12V+ Wire: Gray Car Radio Ground Wire: Brown Car Stereo Illumination Wire: Green Car Stereo Dimmer Wire: N/A Car Stereo Antenna Trigger Wire: Black/Red Car Stereo Amplifier Trigger Wire: N/A Front Speakers Size: 5 1/4″ Front Speakers Location: Doors Left Front Speaker Wire (+): Pink Left Front Speaker Wire (-): Purple Right Front Speaker Wire (+): Light Green Right Front Speaker Wire (-): Blue Rear Speakers Size: 6 1/2″ Rear Speakers Location: Rear Deck Left Rear Speaker Wire (+): Black Left Rear Speaker Wire (-): Yellow Right Rear Speaker Wire (+): Red Right Rear Speaker Wire (-): White
What is the Stereo wiring diagram 1993 Toyota Camry?
Car Radio Constant 12V+ Wire: Blue/Yellow Car Radio Ignition Switched 12V+ Wire: Gray Car Radio Ground Wire: Brown Car Stereo Illumination Wire: Green Car Stereo Dimmer Wire: N/A Car Stereo Antenna Trigger Wire: Black/Red Car Stereo Amplifier Trigger Wire: N/A Front Speakers Size: 5 1/4″ Front Speakers Location: Doors Left Front Speaker Wire (+): Pink Left Front Speaker Wire (-): Purple Right Front Speaker Wire (+): Light Green Right Front Speaker Wire (-): Blue Rear Speakers Size: 6 1/2″ Rear Speakers Location: Rear Deck Left Rear Speaker Wire (+): Black Left Rear Speaker Wire (-): Yellow Right Rear Speaker Wire (+): Red Right Rear Speaker Wire (-): White
What are the wire colors for 99 intrepid with the infinity stereo?
The wire color codes for a 1999 Dodge Intrepid with the infinity stereo are simple to follow and identify. The car radio constant 12V+ wire is pink, the radio switched 12V+ wire is red/white, the radio ground wire is a black strap, the stereo dimmer wire is orange, and the stereo antenna trigger wire is orange/red. For the front speakers, the left front speaker wire (+) is dark green, the left front speaker wire (-) brown/red, the right front speaker wire (+) is purple, and the right front speaker wire (-) is dark blue/red. For the rear speakers, the left rear speaker wire (+) is brown/yellow, the left rear speaker wire (-) is brown/light blue, the right rear speaker wire (+) is dark blue/white, and the rear right speaker wire (-) is dark blue/orange.
